At Ananka Fasteners Pvt Ltd, we engineer, manufacture, and supply premium Incoloy 800H (UNS N08810) Flat Washer built for demanding service. Controlled-carbon, controlled-grain-size version of Incoloy 800 optimised for creep and rupture strength. This technical datasheet covers the precise dimensional tolerances per DIN 125 and the material requirements dictated by ASTM B408.
A Incoloy 800H Flat Washer distributes fastener load evenly across a joint while resisting the fretting and corrosion that carbon-steel washers are prone to in marine, electrical and outdoor service. The tables below provide the principal dimensions, equivalent material grades, chemical composition and mechanical properties covered by the technical data for this product.
Our flat washers are manufactured in standard and custom configurations, ensuring a precise fit for demanding structural, piping, and chemical-process applications.
| Product Name | Incoloy 800H Flat Washer | Material Category | High-Nickel Alloy |
| Material Grade | Incoloy 800H (UNS N08810) | Fastener Spec | ASTM B408 |
| Dimension Spec | DIN 125 | Material Spec | ASTM B408 |
| Thread Standard | N/A (Plain Washer) | Thread Tolerance | Inside-diameter tolerance per standard |
The DIN 125 specification governs the physical geometry of this product. The tolerances below ensure a secure, reliable mate under service loads. DIN 125 Form A governs metric plain (flat) washers with a chamfered edge.
| Nominal Size (for bolt) | Inside Diameter d1 (mm) | Outside Diameter d2 (mm) | Thickness s (mm) |
|---|---|---|---|
| M6 | 6.4 | 12.0 | 1.6 |
| M8 | 8.4 | 16.0 | 1.6 |
| M10 | 10.5 | 20.0 | 2.0 |
| M12 | 13.0 | 24.0 | 2.5 |
| M16 | 17.0 | 30.0 | 3.0 |
| M20 | 21.0 | 37.0 | 3.0 |
| M24 | 25.0 | 44.0 | 4.0 |
This dimensional series carries a chamfered outer edge and is the standard flat washer configuration for general assembly. Buyers should confirm the required nominal diameter, inside-diameter clearance class and outside diameter against the purchase drawing or applicable standard before ordering.
The UNS N08810 Flat Washer is manufactured from Incoloy 800H, a high-nickel alloy. The equivalent designations below assist with cross-referencing this material against European, British and other national standards.
| US / UNS | Werkstoff Nr. (DIN) | European (EN) | British Standard (BS) | Other / AFNOR |
|---|---|---|---|---|
| N08810 | 1.4958 | X5NiCrAlTi31-20 | NA 15H | – |
This section details the chemical composition limits and minimum mechanical properties governing Incoloy 800H (UNS N08810) fasteners, as dictated by ASTM B408 (chemistry & mechanicals) and the raw bar/rod standard ASTM B408.
| Element | Composition, % |
|---|---|
| Nickel | 30.0–35.0 |
| Chromium | 19.0–23.0 |
| Iron, min | 39.5 |
| Carbon | 0.05–0.10 |
| Aluminium | 0.15–0.60 |
| Titanium | 0.15–0.60 |
| Manganese, max | 1.5 |
| Silicon, max | 1.0 |
| Condition / Temper | Tensile Strength min, psi (MPa) | Yield Strength min, psi (MPa) | Elongation min, % | Hardness |
|---|---|---|---|---|
| Solution-annealed bar | 65 000 (450) | 25 000 (170) | 30 | – |
Our Incoloy 800H flat washers are specified across the following industries and service conditions, drawing on the material’s core strengths:
For severe sour, high-temperature or highly acidic service, the exact operating conditions should be reviewed against the alloy’s certified data rather than general nickel-alloy assumptions.
Every batch of Flat Washers produced undergoes rigorous internal and third-party testing to ensure zero-defect delivery. We supply complete traceability with our global shipments.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
This datasheet references DIN 125 for dimensional requirements and ASTM B408 for material and fastener requirements. The applicable standard edition and purchase requirements should be confirmed for every project.
For DIN standards information, see the DIN standards catalogue. For ASTM International material and fastener specifications, see the ASTM International standards catalogue. These external references are provided for standards identification; the purchaser should verify the current edition applicable to the order.
A Incoloy 800H Flat Washer is a plain load-distribution washer manufactured from Incoloy 800H (UNS N08810). The product combines the DIN 125 dimensional geometry with the ASTM B408 material and fastener requirements.
The dimensional information in this datasheet is based on DIN 125, which governs the physical geometry of this product. The table above provides the principal dimensions listed for the Incoloy 800H product range.
Incoloy 800H is identified as UNS N08810. The equivalent designations listed in this datasheet include Werkstoff Nr. 1.4958, EN X5NiCrAlTi31-20, British Standard NA 15H, –.
Incoloy 800H is a high-nickel alloy known for excellent resistance to high-temperature oxidation and aggressive chemical environments. For severe sour, high-temperature or highly acidic service, the exact operating conditions should be reviewed against the alloy’s certified data rather than general nickel-alloy assumptions.
The product information supports standard and custom configurations. For a quotation, provide the required material grade, nominal size, dimensional requirement, quantity, standard and any inspection or certificate requirements.
Need a Incoloy 800H Flat Washer for an industrial project? Send the required size, quantity, standard and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: Incoloy 800H / UNS N08810, nominal size, DIN 125 requirement, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
