At Ananka Fasteners Pvt Ltd, we engineer, manufacture, and supply premium Super Duplex S32906 (UNS S32906) Hex Bolt (Partial Thread) built for demanding service. High-nitrogen 29Cr super duplex developed for umbilical tubing and severe seawater service. This technical datasheet covers the precise dimensional tolerances per DIN 931 and the material requirements dictated by ASTM A1082 UNS S32906 and ASTM A276 / A479.
A Super Duplex S32906 Hex Bolt with a partial thread leaves an unthreaded shank across the shear plane, which is preferred in joints designed to resist shear loading. The tables below provide the principal dimensions, equivalent material grades, chemical composition and mechanical properties covered by the technical data for this product.
Our hex bolts are manufactured in standard and custom configurations, ensuring a precise fit for demanding structural, piping, and chemical-process applications.
| Product Name | Super Duplex S32906 Hex Bolt (Partial Thread) | Material Category | Super Duplex Stainless Steel |
| Material Grade | Super Duplex S32906 (UNS S32906) | Fastener Spec | ASTM A1082 UNS S32906 |
| Dimension Spec | DIN 931 | Material Spec | ASTM A276 / A479 |
| Thread Standard | ISO 261 / ISO 965 (Metric Coarse) | Thread Tolerance | 6g / 4g6g |
The DIN 931 specification governs the physical geometry of this product. The tolerances below ensure a secure, reliable mate under service loads. DIN 931 covers partially threaded hex bolts (shank plus thread).
| Nominal Thread (d) | Pitch (mm) | Width Across Flats s (mm) | Width Across Corners e (min, mm) | Head Height k (mm) |
|---|---|---|---|---|
| M6 | 1.0 | 10.00 | 11.05 | 4.0 |
| M8 | 1.25 | 13.00 | 14.38 | 5.3 |
| M10 | 1.5 | 16.00 | 17.77 | 6.4 |
| M12 | 1.75 | 18.00 | 20.03 | 7.5 |
| M16 | 2.0 | 24.00 | 26.75 | 10.0 |
| M20 | 2.5 | 30.00 | 33.53 | 12.5 |
| M24 | 3.0 | 36.00 | 39.98 | 15.0 |
| M30 | 3.5 | 46.00 | 50.85 | 18.7 |
| M36 | 4.0 | 55.00 | 60.79 | 22.5 |
An unthreaded body section is retained below the head, with threading provided only along the lower portion of the shank. Buyers should confirm the required nominal diameter, thread length, grip length and thread class against the purchase drawing or applicable standard before ordering.
The UNS S32906 Hex Bolt (Partial Thread) is manufactured from Super Duplex S32906, a super duplex stainless steel. The equivalent designations below assist with cross-referencing this material against European, British and other national standards.
| US / UNS | Werkstoff Nr. (DIN) | European (EN) | British Standard (BS) | Other / AFNOR |
|---|---|---|---|---|
| S32906 | 1.4477 | X2CrNiMoN29-7-2 | – | – |
This section details the chemical composition limits and minimum mechanical properties governing Super Duplex S32906 (UNS S32906) fasteners, as dictated by ASTM A1082 UNS S32906 (chemistry & mechanicals) and the raw bar/rod standard ASTM A276 / A479.
| Element | Composition, % |
|---|---|
| Chromium | 28.0–30.0 |
| Nickel | 5.8–7.5 |
| Molybdenum | 1.5–2.6 |
| Nitrogen | 0.30–0.40 |
| Manganese | 0.80–1.50 |
| Carbon, max | 0.030 |
| Silicon, max | 0.50 |
| Iron | Balance |
| Condition / Temper | Tensile Strength min, psi (MPa) | Yield Strength min, psi (MPa) | Elongation min, % | Hardness |
|---|---|---|---|---|
| Solution-annealed bar (A1082) | 116 000 (800) | 80 000 (550) | 25 | ≤32 HRC |
Our Super Duplex S32906 hex bolts are specified across the following industries and service conditions, drawing on the material’s core strengths:
Welding and heat-treatment procedures should be fully qualified, and service conditions reviewed against the certified pitting-resistance data, before use in critical applications.
Every batch of Hex Bolts produced undergoes rigorous internal and third-party testing to ensure zero-defect delivery. We supply complete traceability with our global shipments.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
This datasheet references DIN 931 for dimensional requirements and ASTM A1082 UNS S32906 for material and fastener requirements. The applicable standard edition and purchase requirements should be confirmed for every project.
For DIN standards information, see the DIN standards catalogue. For ASTM International material and fastener specifications, see the ASTM International standards catalogue. These external references are provided for standards identification; the purchaser should verify the current edition applicable to the order.
A Super Duplex S32906 Hex Bolt (Partial Thread) is a hex-head bolt with a partially threaded shank and an unthreaded body section manufactured from Super Duplex S32906 (UNS S32906). The product combines the DIN 931 dimensional geometry with the ASTM A1082 UNS S32906 material and fastener requirements.
The dimensional information in this datasheet is based on DIN 931, which governs the physical geometry of this product. The table above provides the principal dimensions listed for the Super Duplex S32906 product range.
Super Duplex S32906 is identified as UNS S32906. The equivalent designations listed in this datasheet include Werkstoff Nr. 1.4477, EN X2CrNiMoN29-7-2, British Standard –, –.
Super Duplex S32906 is a super duplex stainless steel known for very high pitting and crevice-corrosion resistance in aggressive chloride environments. Welding and heat-treatment procedures should be fully qualified, and service conditions reviewed against the certified pitting-resistance data, before use in critical applications.
The product information supports standard and custom configurations. For a quotation, provide the required material grade, nominal size, dimensional requirement, quantity, standard and any inspection or certificate requirements.
Need a Super Duplex S32906 Hex Bolt (Partial Thread) for an industrial project? Send the required size, quantity, standard and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: Super Duplex S32906 / UNS S32906, nominal size, DIN 931 requirement, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
