At Ananka Fasteners Pvt Ltd, we engineer, manufacture, and supply premium SS 310S (UNS S31008) Hex Nut built for demanding service. Low-carbon 310 offering improved weldability while retaining high-temperature oxidation resistance. This technical datasheet covers the precise dimensional tolerances per DIN 934 and the material requirements dictated by ASTM F594 Group 3 and ASTM A276 / A479.
A SS 310S Hex Nut is the standard mating nut for general-purpose bolted assemblies and is manufactured to match the thread series of its corresponding bolt. The tables below provide the principal dimensions, equivalent material grades, chemical composition and mechanical properties covered by the technical data for this product.
Our hex nuts are manufactured in standard and custom configurations, ensuring a precise fit for demanding structural, piping, and chemical-process applications.
| Product Name | SS 310S Hex Nut | Material Category | Stainless Steel |
| Material Grade | SS 310S (UNS S31008) | Fastener Spec | ASTM F594 Group 3 |
| Dimension Spec | DIN 934 | Material Spec | ASTM A276 / A479 |
| Thread Standard | ISO 261 / ISO 965 (Metric Coarse) | Thread Tolerance | 6H / 4H6H (Internal) |
The DIN 934 specification governs the physical geometry of this product. The tolerances below ensure a secure, reliable mate under service loads. DIN 934 governs metric hexagon nuts.
| Nominal Thread (d) | Pitch (mm) | Width Across Flats s (mm) | Width Across Corners e (min, mm) | Thickness m (Max, mm) |
|---|---|---|---|---|
| M6 | 1.0 | 10.00 | 11.05 | 5.0 |
| M8 | 1.25 | 13.00 | 14.38 | 6.5 |
| M10 | 1.5 | 16.00 | 17.77 | 8.0 |
| M12 | 1.75 | 18.00 | 20.03 | 10.0 |
| M16 | 2.0 | 24.00 | 26.75 | 13.0 |
| M20 | 2.5 | 30.00 | 32.95 | 16.0 |
| M24 | 3.0 | 36.00 | 39.55 | 19.0 |
| M30 | 3.5 | 46.00 | 50.85 | 24.0 |
The nut thread is manufactured to match the corresponding bolt thread series and class. Buyers should confirm the required nominal size, thread series and thread class against the purchase drawing or applicable standard before ordering.
The UNS S31008 Hex Nut is manufactured from SS 310S, a stainless steel. The equivalent designations below assist with cross-referencing this material against European, British and other national standards.
| US / UNS | Werkstoff Nr. (DIN) | European (EN) | British Standard (BS) | Other / AFNOR |
|---|---|---|---|---|
| S31008 | 1.4845 | X8CrNi25-21 | 310 S16 | Z8 CNS 25-20 (AFNOR) |
This section details the chemical composition limits and minimum mechanical properties governing SS 310S (UNS S31008) fasteners, as dictated by ASTM F594 Group 3 (chemistry & mechanicals) and the raw bar/rod standard ASTM A276 / A479.
| Element | Composition, % |
|---|---|
| Chromium | 24.0–26.0 |
| Nickel | 19.0–22.0 |
| Carbon, max | 0.08 |
| Manganese, max | 2.0 |
| Silicon, max | 1.50 |
| Phosphorus, max | 0.045 |
| Sulfur, max | 0.030 |
| Iron | Balance |
| Condition / Temper | Tensile Strength min, psi (MPa) | Yield Strength min, psi (MPa) | Elongation min, % | Hardness |
|---|---|---|---|---|
| Annealed bar | 75 000 (515) | 30 000 (205) | 40 | – |
Our SS 310S hex nuts are specified across the following industries and service conditions, drawing on the material’s core strengths:
For applications exposed to highly aggressive chemicals or chloride-rich environments, the exact operating conditions should be reviewed against the certified data for this grade rather than general stainless steel assumptions.
Every batch of Hex Nuts produced undergoes rigorous internal and third-party testing to ensure zero-defect delivery. We supply complete traceability with our global shipments.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
This datasheet references DIN 934 for dimensional requirements and ASTM F594 Group 3 for material and fastener requirements. The applicable standard edition and purchase requirements should be confirmed for every project.
For DIN standards information, see the DIN standards catalogue. For ASTM International material and fastener specifications, see the ASTM International standards catalogue. These external references are provided for standards identification; the purchaser should verify the current edition applicable to the order.
A SS 310S Hex Nut is a standard hex-driven nut manufactured from SS 310S (UNS S31008). The product combines the DIN 934 dimensional geometry with the ASTM F594 Group 3 material and fastener requirements.
The dimensional information in this datasheet is based on DIN 934, which governs the physical geometry of this product. The table above provides the principal dimensions listed for the SS 310S product range.
SS 310S is identified as UNS S31008. The equivalent designations listed in this datasheet include Werkstoff Nr. 1.4845, EN X8CrNi25-21, British Standard 310 S16, Z8 CNS 25-20 (AFNOR).
SS 310S is a stainless steel known for good general corrosion resistance and wide industrial availability. For applications exposed to highly aggressive chemicals or chloride-rich environments, the exact operating conditions should be reviewed against the certified data for this grade rather than general stainless steel assumptions.
The product information supports standard and custom configurations. For a quotation, provide the required material grade, nominal size, dimensional requirement, quantity, standard and any inspection or certificate requirements.
Need a SS 310S Hex Nut for an industrial project? Send the required size, quantity, standard and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: SS 310S / UNS S31008, nominal size, DIN 934 requirement, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
