At Ananka Fasteners Pvt Ltd, we engineer, manufacture, and supply premium Titanium Grade 1 (UNS R50250) Threaded Rod / Stud built for demanding service. Commercially pure titanium with the highest ductility and formability and excellent corrosion resistance. This technical datasheet covers the precise dimensional tolerances per DIN 976 and the material requirements dictated by ASTM F468 Gr R50250 and ASTM B348 Gr 1.
A Titanium Grade 1 Threaded Rod is continuously threaded along its length and is used where cut-to-length studs, anchor rods or all-thread hanger rods are required. The tables below provide the principal dimensions, equivalent material grades, chemical composition and mechanical properties covered by the technical data for this product.
Our threaded rods / studs are manufactured in standard and custom configurations, ensuring a precise fit for demanding structural, piping, and chemical-process applications.
| Product Name | Titanium Grade 1 Threaded Rod / Stud | Material Category | Titanium |
| Material Grade | Titanium Grade 1 (UNS R50250) | Fastener Spec | ASTM F468 Gr R50250 |
| Dimension Spec | DIN 976 | Material Spec | ASTM B348 Gr 1 |
| Thread Standard | ISO 261 / ISO 965 (Metric Coarse) | Thread Tolerance | 6g / 4g6g |
The DIN 976 specification governs the physical geometry of this product. The tolerances below ensure a secure, reliable mate under service loads. DIN 976 covers fully threaded metric rod / studs, supplied in 1 metre lengths and cut to size.
| Nominal Thread (d) | Pitch (mm) | Pitch Diameter (mm) | Tensile Stress Area (mm2) | Standard Length (mm) |
|---|---|---|---|---|
| M6 | 1.0 | 5.350 | 20.1 | 1000 |
| M8 | 1.25 | 7.188 | 36.6 | 1000 |
| M10 | 1.5 | 9.026 | 58.0 | 1000 |
| M12 | 1.75 | 10.863 | 84.3 | 1000 |
| M16 | 2.0 | 14.701 | 157.0 | 1000 |
| M20 | 2.5 | 18.376 | 245.0 | 1000 |
| M24 | 3.0 | 22.051 | 353.0 | 1000 |
Continuous threading allows the rod to be cut to length on site or supplied pre-cut to a specified length. Buyers should confirm the required nominal diameter, thread series and length against the purchase drawing or applicable standard before ordering.
The UNS R50250 Threaded Rod / Stud is manufactured from Titanium Grade 1, a titanium alloy. The equivalent designations below assist with cross-referencing this material against European, British and other national standards.
| US / UNS | Werkstoff Nr. (DIN) | European (EN) | British Standard (BS) | Other / AFNOR |
|---|---|---|---|---|
| R50250 | 3.7025 | Ti1 / Ti-CP1 | TA1 | T35 (AFNOR) |
This section details the chemical composition limits and minimum mechanical properties governing Titanium Grade 1 (UNS R50250) fasteners, as dictated by ASTM F468 Gr R50250 (chemistry & mechanicals) and the raw bar/rod standard ASTM B348 Gr 1.
| Element | Composition, % |
|---|---|
| Titanium | Balance |
| Iron, max | 0.20 |
| Oxygen, max | 0.18 |
| Carbon, max | 0.08 |
| Nitrogen, max | 0.03 |
| Hydrogen, max | 0.015 |
| Condition / Temper | Tensile Strength min, psi (MPa) | Yield Strength min, psi (MPa) | Elongation min, % | Hardness |
|---|---|---|---|---|
| Annealed bar | 35 000 (240) | 25 000 (170) | 24 | – |
Our Titanium Grade 1 threaded rods / studs are specified across the following industries and service conditions, drawing on the material’s core strengths:
Compatibility with reducing acids and the risk of galvanic contact with dissimilar metals should be reviewed before use, even though the alloy performs well in oxidizing and chloride environments.
Every batch of Threaded Rods / Studs produced undergoes rigorous internal and third-party testing to ensure zero-defect delivery. We supply complete traceability with our global shipments.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
This datasheet references DIN 976 for dimensional requirements and ASTM F468 Gr R50250 for material and fastener requirements. The applicable standard edition and purchase requirements should be confirmed for every project.
For DIN standards information, see the DIN standards catalogue. For ASTM International material and fastener specifications, see the ASTM International standards catalogue. These external references are provided for standards identification; the purchaser should verify the current edition applicable to the order.
A Titanium Grade 1 Threaded Rod / Stud is a continuously threaded rod manufactured from Titanium Grade 1 (UNS R50250). The product combines the DIN 976 dimensional geometry with the ASTM F468 Gr R50250 material and fastener requirements.
The dimensional information in this datasheet is based on DIN 976, which governs the physical geometry of this product. The table above provides the principal dimensions listed for the Titanium Grade 1 product range.
Titanium Grade 1 is identified as UNS R50250. The equivalent designations listed in this datasheet include Werkstoff Nr. 3.7025, EN Ti1 / Ti-CP1, British Standard TA1, T35 (AFNOR).
Titanium Grade 1 is a titanium alloy known for an excellent strength-to-weight ratio and outstanding corrosion resistance. Compatibility with reducing acids and the risk of galvanic contact with dissimilar metals should be reviewed before use, even though the alloy performs well in oxidizing and chloride environments.
The product information supports standard and custom configurations. For a quotation, provide the required material grade, nominal size, dimensional requirement, quantity, standard and any inspection or certificate requirements.
Need a Titanium Grade 1 Threaded Rod / Stud for an industrial project? Send the required size, quantity, standard and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: Titanium Grade 1 / UNS R50250, nominal size, DIN 976 requirement, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
