MONEL K500 THREADED RODS - DIN 976 / UNS N05500

Name: Ananka Group - India's Leading Fasteners Manufacturer Company
Rating: 5 (451 reviews)

■ Dimensions in mm (Based on DIN 976 metrics)

PART NUMBER	THREAD	PITCH	NOMINAL DIAMETER (d) Max	THEORETICAL WEIGHT (Kg / Meter Approx)
AN-TR-MK500-M3	M3	0.50	3.00	0.044
AN-TR-MK500-M4	M4	0.70	4.00	0.078
AN-TR-MK500-M5	M5	0.80	5.00	0.124
AN-TR-MK500-M6	M6	1.00	6.00	0.177
AN-TR-MK500-M8	M8	1.25	8.00	0.319
AN-TR-MK500-M10	M10	1.50	10.00	0.500
AN-TR-MK500-M12	M12	1.75	12.00	0.725
AN-TR-MK500-M14	M14	2.00	14.00	0.970
AN-TR-MK500-M16	M16	2.00	16.00	1.330
AN-TR-MK500-M18	M18	2.50	18.00	1.650
AN-TR-MK500-M20	M20	2.50	20.00	2.080
AN-TR-MK500-M22	M22	2.50	22.00	2.540
AN-TR-MK500-M24	M24	3.00	24.00	3.000

Note: Standard lengths are 1000mm, 2000mm, and 3000mm. Contact Ananka Group for expanded diameters (up to M56) and custom cut-to-length services.

■ Technical Specifications

Material	Monel K500 (Precipitation-Hardenable Nickel-Copper Alloy)
Standard / Classification	UNS N05500 \| DIN 2.4375 \| Alloy K-500 Density: 8.44 g/cm³ Melting Range: 1315 - 1350°C (2400 - 2460°F)
Mechanical Properties (Age Hardened)	Tensile Strength: ≥ 965 MPa (140 ksi) Yield Strength (0.2% Offset): ≥ 690 MPa (100 ksi) Elongation (%): ≥ 20% Hardness (Rockwell C): ≥ 24 HRC
Chemical Composition (%)	Ni (+Co): 63.0 Min \| Cu: 27.0 - 33.0 \| Al: 2.30 - 3.15 \| Ti: 0.35 - 0.85 \| Fe: 2.0 Max \| Mn: 1.5 Max \| C: 0.25 Max \| Si: 0.50 Max \| S: 0.01 Max
Manufacturing Specification	Conforms to DIN 976 (formerly DIN 975) and ASTM F468. Material is sourced from high-quality precipitation-hardened stock conforming to ASTM B865.
Thread	Metric ISO standard. Fully threaded end-to-end (Continuous Thread) with Class 6g tolerance.
Properties & Applications	Monel K500 threaded rods provide the same high level of corrosion resistance as Monel 400 but with significantly higher strength. They are virtually non-magnetic and provide excellent performance in sour-gas environments. Widely used in the marine sector, oil and gas drilling (drill collars), and chemical processing for structural components and secure flanged connections.
Marking	Marked on rod faces or color-coded on the ends in accordance with ASTM F468, including Manufacturer Identification (Ananka) and Grade identifier.
Qualification & Acceptance	Independently tested for thread accuracy, hardness, chemical analysis, and supplied with EN 10204 Type 3.1 Material Test Certification.