Inconel 718 Fasteners (UNS N07718)
Ananka Fasteners is a premier manufacturer and supplier of high-strength Inconel 718 Fasteners. Manufactured according to official Special Metals Alloy Standards, Alloy 718 is known for its exceptional yield strength and resistance to high-temperature corrosion, making it the critical standard for aerospace, EPC contracting, and extreme industrial applications.
■ Inconel Alloy Selection Grid
To assist procurement managers and engineers, use our technical grid below to compare the performance limits of our primary Inconel grades. Click the specific grade for its dedicated specification page.
| Grade / Anchor Link | Yield Strength (Min) | Pitting Resistance (PREN) | Max Temperature Limits |
|---|---|---|---|
| Inconel 600 Fasteners | 35 ksi (240 MPa) | N/A (Oxidation focused) | 2000°F (1093°C) |
| Inconel 601 Fasteners | 30 ksi (205 MPa) | N/A (Oxidation focused) | 2200°F (1204°C) |
| Inconel 625 Fasteners | 60 ksi (414 MPa) | ~45 (Excellent) | 1800°F (982°C) |
| Inconel 718 Fasteners | 150 ksi (1034 MPa) | ~30 (Very Good) | 1300°F (704°C) |
| Inconel 725 Fasteners | 120 ksi (827 MPa) | ~45 (Excellent) | 1000°F (538°C) |
■ Complete Range of Inconel 718 Fasteners
We manufacture a comprehensive range of Alloy 718 fasteners designed for high-stress joints.
| Bolts & Screws | Nuts & Washers | Studs & Rods |
|---|---|---|
| Hex Bolts / Heavy Hex Bolts | Hex Nuts / Heavy Hex Nuts | Fully Threaded Studs |
| Socket Head Cap Screws | Flange Nuts / Lock Nuts | Double Ended Studs |
| Flange Bolts / 12-Point Bolts | Flat Washers / Spring Washers | Threaded Rods / Tie Rods |
■ Mechanical Properties & Yield Strength
Inconel 718 Fasteners achieve their extreme strength through precipitation hardening. Below are the mechanical properties required for demanding EPC and structural applications:
| Tensile Strength (Min) | Yield Strength 0.2% Offset (Min) | Elongation (%) | Hardness (HRC) |
|---|---|---|---|
| 185 ksi (1275 MPa) | 150 ksi (1034 MPa) | 12% Min | 36 - 44 HRC |
■ Aerospace & High-Temperature Applications
Inconel 718 is highly versatile, retaining its mechanical properties from cryogenic temperatures up to 1300°F (704°C).
- Aerospace & Aviation: Jet engine components, gas turbine blades, and structural aerospace fasteners.
- Oil & Gas / EPC: Down-hole shafting, high-pressure wellhead parts, and sour gas (H2S) environment joints.
- Nuclear Engineering: Reactor internals requiring high strength and resistance to neutron degradation.
- Cryogenic Storage: Liquid natural gas (LNG) tanks and cryogenic transfer lines.
■ Quality Assurance & MTC Downloads
As a primary manufacturer based in Mumbai, our quality control goes beyond standard chemical analysis. We conduct rigorous first-hand testing on all Inconel 718 Fasteners to ensure they meet the stringent safety requirements of EPC contractors and aerospace engineers.
- Ultrasonic Testing (UT): Internal flaw detection performed on raw billets prior to machining.
- Destructive Testing: In-house tensile, yield, and shear testing to verify precipitation hardening efficacy.
- PMI (Positive Material Identification): 100% optical emission spectroscopy scanning prior to dispatch.
📄 Download Sample EN 10204:3.1 MTC (PDF)