At Ananka Fasteners Pvt Ltd, we manufacture and supply fasteners certified to ASTM F467/F467M. Standard specification covering the chemical and mechanical requirements for nonferrous (copper-, nickel-, aluminum- and titanium-based alloy) nuts intended for general corrosion-resistant service, in inch (F467) and metric (F467M) series.
Standard specification covering the chemical and mechanical requirements for nonferrous (copper-, nickel-, aluminum- and titanium-based alloy) nuts intended for general corrosion-resistant service, in inch (F467) and metric (F467M) series.
| Grade / Class | UNS / Designation | Type / Notes |
|---|---|---|
| F467AB | C26000 | Brass (Cu-Zn), general service |
| F467H | C63000 | Aluminum bronze, high strength |
| F467K | C65100 | Low-silicon bronze |
| F467L | C65500 | High-silicon bronze |
| F467U | N04400 | Nickel-copper Alloy 400 (Monel) |
| F467W | N05500 | Nickel-copper-aluminum Alloy K-500 |
| F467AC | N06625 | Nickel-chromium Alloy 625 |
| – | A92024/A96061 | Aluminum 2024-T4 / 6061-T6 and titanium grades also listed |
Minimum mechanical requirements per ASTM F467/F467M.
| Grade / Class / Condition | Tensile Strength, min | Yield Strength, min | Elongation, min % | Hardness |
|---|---|---|---|---|
| F467AB Brass C26000 | – | – | – | 55 HRF min; proof stress 60 ksi (414 MPa) |
| F467H Al-Bronze C63000 | – | – | – | 85 HRB min; proof stress 100 ksi (690 MPa) |
| F467K Si-Bronze C65100 | – | – | – | 75 HRB min; proof stress 70 ksi (483 MPa) |
| F467L Si-Bronze C65500 | – | – | – | 60 HRB min; proof stress 50 ksi (345 MPa) |
| F467U Alloy 400 N04400 | – | – | – | 75 HRB min; proof stress 80 ksi (552 MPa) |
| F467W Alloy K-500 N05500 | – | – | – | 24 HRC min; proof stress 130 ksi (896 MPa) |
| F467AC Alloy 625 N06625 | – | – | – | 85 HRB-35 HRC; proof stress 60 ksi (414 MPa) |
| Grade | Key Composition, % |
|---|---|
| Brass C26000 | Cu ~70, Zn ~30 |
| Al Bronze C63000 | Cu ~78-85, Al 9-11, Fe 2-4, Ni 4-5.5 |
| Si Bronze C65500 | Cu bal, Si 2.8-3.8, Mn 0.5-1.3 |
| Alloy 400 N04400 | Ni 63 min, Cu 28-34, Fe 2.5 max |
| Alloy K-500 N05500 | Ni 63 min, Cu 27-33, Al 2.3-3.15, Ti 0.35-0.85 |
| Alloy 625 N06625 | Ni 58 min, Cr 20-23, Mo 8-10, Nb 3.15-4.15 |
Companion nut standard to ASTM F468 (nonferrous bolts). Marking/grade system aligns with ASME B18.2.2 nut dimensions; alloys correspond to ASTM B series wrought material specs (B98 silicon bronze, B164 nickel-copper, B446 Alloy 625).
For the official ASTM International standards catalogue, see the ASTM International standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We supply ASTM F467/F467M fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Standard specification covering the chemical and mechanical requirements for nonferrous (copper-, nickel-, aluminum- and titanium-based alloy) nuts intended for general corrosion-resistant service, in inch (F467) and metric (F467M) series.
Ananka Fasteners supplies F467AB, F467H, F467K, F467L, F467U, F467W, F467AC, – to ASTM F467/F467M. See the Grades / Classes Covered table above for full details of each grade.
Minimum tensile strength, yield strength, elongation and hardness requirements vary by grade — see the Mechanical Properties table above for the complete breakdown.
We supply ASTM F467/F467M fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
Yes. For a quotation, provide the required fastener type, grade, nominal size, dimensional standard, quantity and any inspection or certificate requirements.
Need a fastener released to ASTM F467/F467M for an industrial project? Send the required fastener type, grade, size, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ASTM F467/F467M requirement, material grade, fastener type, nominal size, dimensional standard, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Data compiled per ASTM F467/F467M and industry references; provided for reference only — confirm against the current edition of the standard and certified mill test reports before design use.
