At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of DIN 96. DIN 96 covers slotted round (dome) head wood screws. The domed head sits proud of the surface for a traditional decorative fixing. Threads follow the wood screw (AB) form to DIN 7998 with a gimlet point for direct driving into timber and soft materials.
DIN 96 covers slotted round (dome) head wood screws. The domed head sits proud of the surface for a traditional decorative fixing. Threads follow the wood screw (AB) form to DIN 7998 with a gimlet point for direct driving into timber and soft materials.
Slotted round (dome) head wood screw
Key dimensions for common sizes are listed below.
| Screw Dia d (mm) | Head Dia dk (mm) | Head Height k (mm) | Slot Width n (mm) | Slot Depth t (mm) |
|---|---|---|---|---|
| 2.0 | 4 | 1.4 | 0.5 | 0.9 |
| 2.5 | 5 | 1.7 | 0.6 | 1.1 |
| 3.0 | 6 | 2.1 | 0.8 | 1.35 |
| 3.5 | 7 | 2.4 | 0.8 | 1.6 |
| 4.0 | 8 | 2.8 | 1.0 | 1.8 |
| 4.5 | 9 | 3.1 | 1.0 | 2.0 |
| 5.0 | 10 | 3.5 | 1.2 | 2.3 |
| 6.0 | 12 | 4.2 | 1.6 | 2.7 |
Wood screw (AB) thread per DIN 7998
Related and equivalent standards include DIN 95 (raised csk woodscrew), DIN 97 (countersunk woodscrew) and DIN 7996 (round head cross-recess).
For the official DIN standards catalogue, see the DIN standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce DIN 96 fasteners in carbon and alloy steel, austenitic and duplex stainless, and high-nickel, titanium and copper alloys — for structural, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
DIN 96 covers slotted round (dome) head wood screws. The domed head sits proud of the surface for a traditional decorative fixing. Threads follow the wood screw (AB) form to DIN 7998 with a gimlet point for direct driving into timber and soft materials.
Ananka Fasteners manufactures DIN 96 in sizes from 2.0–6.0. See the Dimensional Table above for the complete size breakdown.
Wood screw (AB) thread per DIN 7998
We produce DIN 96 fasteners in carbon and alloy steel, austenitic and duplex stainless, and high-nickel, titanium and copper alloys — for structural, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to DIN 96 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: DIN 96 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per DIN 96 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
