At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of DIN 915. Hexagon socket set (grub) screws with dog point. Headless, fully threaded, internal hex drive with a cylindrical extended (dog) tip that engages a hole or slot in the mating part for location and light drive transmission. Sizes M3 through M20.
Hexagon socket set (grub) screws with dog point. Headless, fully threaded, internal hex drive with a cylindrical extended (dog) tip that engages a hole or slot in the mating part for location and light drive transmission. Sizes M3 through M20.
Socket set screw (dog point)
Key dimensions for common sizes are listed below.
| Nominal Size (M) | Thread Pitch (mm) | Hex Socket s (mm) | Dog Point Dia dp (mm) | Dog Point Length z (mm) |
|---|---|---|---|---|
| M3 | 0.50 | 1.5 | 2.0 | 1.75 |
| M4 | 0.70 | 2.0 | 2.5 | 2.25 |
| M5 | 0.80 | 2.5 | 3.5 | 2.75 |
| M6 | 1.00 | 3.0 | 4.0 | 3.25 |
| M8 | 1.25 | 4.0 | 5.5 | 4.3 |
| M10 | 1.50 | 5.0 | 7.0 | 5.3 |
| M12 | 1.75 | 6.0 | 8.5 | 6.3 |
| M16 | 2.00 | 8.0 | 12.0 | 8.36 |
| M20 | 2.50 | 10.0 | 15.0 | 10.36 |
6g (external metric coarse)
ISO 4028 (equivalent), DIN 913 (flat point), DIN 914 (cone point), DIN 916 (cup point)
For the official DIN standards catalogue, see the DIN standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce DIN 915 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Hexagon socket set (grub) screws with dog point. Headless, fully threaded, internal hex drive with a cylindrical extended (dog) tip that engages a hole or slot in the mating part for location and light drive transmission. Sizes M3 through M20.
Ananka Fasteners manufactures DIN 915 in sizes from M3–M20. See the Dimensional Table above for the complete size breakdown.
6g (external metric coarse)
We produce DIN 915 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to DIN 915 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: DIN 915 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per DIN 915 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
