At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of DIN 929. DIN 929 specifies hexagon weld nuts with a projecting collar and three weld projections for resistance/projection welding to sheet metal, forming a captive threaded fastening. Low-carbon steel suitable for welding.
DIN 929 specifies hexagon weld nuts with a projecting collar and three weld projections for resistance/projection welding to sheet metal, forming a captive threaded fastening. Low-carbon steel suitable for welding.
hexagon weld nut (projection)
Key dimensions for common sizes are listed below.
| Nominal Size | Width Across Flats s (mm) | Width Across Corners e (mm) | Height m (mm) | Collar Dia d (mm) |
|---|---|---|---|---|
| M5 | 10 | 10.95 | 4 | 7 |
| M6 | 11 | 12.02 | 5 | 8 |
| M8 | 14 | 15.38 | 6.5 | 10.5 |
| M10 | 17 | 18.74 | 8 | 12.5 |
| M12 | 19 | 20.91 | 10 | 14.8 |
| M16 | 24 | 26.51 | 13 | 18.8 |
6H (internal thread)
[‘DIN 928’, ‘DIN 34817’]
For the official DIN standards catalogue, see the DIN standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce DIN 929 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
DIN 929 specifies hexagon weld nuts with a projecting collar and three weld projections for resistance/projection welding to sheet metal, forming a captive threaded fastening. Low-carbon steel suitable for welding.
Ananka Fasteners manufactures DIN 929 in sizes from M5–M16. See the Dimensional Table above for the complete size breakdown.
6H (internal thread)
We produce DIN 929 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to DIN 929 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: DIN 929 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per DIN 929 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
