At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of DIN 960. DIN 960 specifies hexagon head bolts with metric FINE pitch thread, partially threaded (shank plus thread), product grades A and B. It is the fine-pitch counterpart of DIN 931 (corresponds to ISO 8765). Note: the source catalog description labeled this ‘slotted set screws with cup point’, which is incorrect for DIN 960.
DIN 960 specifies hexagon head bolts with metric FINE pitch thread, partially threaded (shank plus thread), product grades A and B. It is the fine-pitch counterpart of DIN 931 (corresponds to ISO 8765). Note: the source catalog description labeled this ‘slotted set screws with cup point’, which is incorrect for DIN 960.
hex head bolt, fine pitch (partial thread)
Key dimensions for common sizes are listed below.
| Nominal Size x Pitch | Width Across Flats s (mm) | Width Across Corners e min (mm) | Head Height k (mm) |
|---|---|---|---|
| M8x1 | 13 | 14.38 | 5.3 |
| M10x1.25 | 17 | 18.90 | 6.4 |
| M12x1.5 | 19 | 21.10 | 7.5 |
| M14x1.5 | 22 | 24.49 | 8.8 |
| M16x1.5 | 24 | 26.75 | 10 |
| M18x1.5 | 27 | 30.14 | 11.5 |
| M20x1.5 | 30 | 33.53 | 12.5 |
| M22x1.5 | 32 | 35.72 | 14 |
| M24x2 | 36 | 39.98 | 15 |
6g (external fine thread)
[‘DIN 961’, ‘DIN 931’, ‘ISO 8765’]
For the official DIN standards catalogue, see the DIN standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce DIN 960 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
DIN 960 specifies hexagon head bolts with metric FINE pitch thread, partially threaded (shank plus thread), product grades A and B. It is the fine-pitch counterpart of DIN 931 (corresponds to ISO 8765). Note: the source catalog description labeled this ‘slotted set screws with cup point’, which is incorrect for DIN 960.
Ananka Fasteners manufactures DIN 960 in sizes from M8x1–M24x2. See the Dimensional Table above for the complete size breakdown.
6g (external fine thread)
We produce DIN 960 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to DIN 960 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: DIN 960 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per DIN 960 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
