At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of ISO 7435. Slotted set screws with long dog point (metric coarse thread), the ISO equivalent of DIN 417. Used as a grub/adjusting screw where the long cylindrical dog point locates into a mating hole or flat. Input description (‘Hex Socket Button Head Screws with Torx’) was incorrect and has been corrected: ISO 7435 is a SLOTTED (not socket/Torx) set screw with a long dog point.
Slotted set screws with long dog point (metric coarse thread), the ISO equivalent of DIN 417. Used as a grub/adjusting screw where the long cylindrical dog point locates into a mating hole or flat. Input description (‘Hex Socket Button Head Screws with Torx’) was incorrect and has been corrected: ISO 7435 is a SLOTTED (not socket/Torx) set screw with a long dog point.
Slotted set screw, long dog point
Key dimensions for common sizes are listed below.
| Thread d | Pitch (mm) | Slot width n (mm) | Slot depth t (mm) | Dog dia dp (mm) | Dog length z long (mm) |
|---|---|---|---|---|---|
| M3 | 0.5 | 0.4 | 1.05 | 2.0 | 1.75 |
| M4 | 0.7 | 0.6 | 1.28 | 2.5 | 2.25 |
| M5 | 0.8 | 0.8 | 1.5 | 3.5 | 2.75 |
| M6 | 1.0 | 1.0 | 1.75 | 4.0 | 3.25 |
| M8 | 1.25 | 1.2 | 2.0 | 5.5 | 4.3 |
| M10 | 1.5 | 1.6 | 2.25 | 7.0 | 5.3 |
| M12 | 1.75 | 2.0 | 2.5 | 8.5 | 6.3 |
6g (external), metric coarse
[‘DIN 417’, ‘ISO 7436’, ‘ISO 4766’, ‘ISO 7434’]
For the official ISO standards catalogue, see the ISO standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce ISO 7435 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Slotted set screws with long dog point (metric coarse thread), the ISO equivalent of DIN 417. Used as a grub/adjusting screw where the long cylindrical dog point locates into a mating hole or flat. Input description (‘Hex Socket Button Head Screws with Torx’) was incorrect and has been corrected: ISO 7435 is a SLOTTED (not socket/Torx) set screw with a long dog point.
Ananka Fasteners manufactures ISO 7435 in sizes from M3–M12. See the Dimensional Table above for the complete size breakdown.
6g (external), metric coarse
We produce ISO 7435 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to ISO 7435 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ISO 7435 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per ISO 7435 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
