At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of ISO 7436. Slotted set screws with cup point (metric coarse thread), the ISO equivalent of DIN 438. A grub screw whose recessed cup point bites into the mating shaft for clamping/locating. Input description (‘Slotted Set Screws with Pins’) has been corrected: ISO 7436 is a slotted set screw with CUP point.
Slotted set screws with cup point (metric coarse thread), the ISO equivalent of DIN 438. A grub screw whose recessed cup point bites into the mating shaft for clamping/locating. Input description (‘Slotted Set Screws with Pins’) has been corrected: ISO 7436 is a slotted set screw with CUP point.
Slotted set screw, cup point
Key dimensions for common sizes are listed below.
| Thread d | Pitch (mm) | Slot width n (mm) | Slot depth t (mm) | Cup dia dz (mm) |
|---|---|---|---|---|
| M3 | 0.5 | 0.4 | 1.05 | 1.4 |
| M4 | 0.7 | 0.6 | 1.28 | 2.0 |
| M5 | 0.8 | 0.8 | 1.5 | 2.5 |
| M6 | 1.0 | 1.0 | 1.75 | 3.0 |
| M8 | 1.25 | 1.2 | 2.0 | 5.0 |
| M10 | 1.5 | 1.6 | 2.25 | 6.0 |
| M12 | 1.75 | 2.0 | 2.5 | 8.0 |
6g (external), metric coarse
[‘DIN 438’, ‘ISO 7435’, ‘ISO 4766’, ‘ISO 7434’]
For the official ISO standards catalogue, see the ISO standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce ISO 7436 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Slotted set screws with cup point (metric coarse thread), the ISO equivalent of DIN 438. A grub screw whose recessed cup point bites into the mating shaft for clamping/locating. Input description (‘Slotted Set Screws with Pins’) has been corrected: ISO 7436 is a slotted set screw with CUP point.
Ananka Fasteners manufactures ISO 7436 in sizes from M3–M12. See the Dimensional Table above for the complete size breakdown.
6g (external), metric coarse
We produce ISO 7436 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to ISO 7436 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ISO 7436 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per ISO 7436 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
