At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of DIN 6926. Prevailing-torque hexagon flange nuts with non-metallic (nylon/polyamide) insert, aligned with ISO 7043. Same across-flats and flange diameter as DIN 6923 but taller to house the locking ring. Common range M5-M20.
Prevailing-torque hexagon flange nuts with non-metallic (nylon/polyamide) insert, aligned with ISO 7043. Same across-flats and flange diameter as DIN 6923 but taller to house the locking ring. Common range M5-M20.
Hexagon flange nut with nylon insert (prevailing torque)
Key dimensions for common sizes are listed below.
| Thread size | Width across flats s (mm) | Flange dia dc (mm) | Total height m max (mm) | Flange thickness c (mm) |
|---|---|---|---|---|
| M5 | 8.0 | 11.8 | 6.4 | 1.0 |
| M6 | 10.0 | 14.2 | 7.5 | 1.1 |
| M8 | 13.0 | 17.9 | 9.5 | 1.2 |
| M10 | 15.0 | 21.8 | 11.9 | 1.5 |
| M12 | 18.0 | 26.0 | 14.0 | 1.8 |
| M14 | 21.0 | 29.9 | 16.4 | 2.1 |
| M16 | 24.0 | 34.5 | 18.9 | 2.4 |
| M20 | 30.0 | 42.8 | 22.3 | 3.0 |
6H (internal metric ISO thread)
[‘ISO 7043’, ‘DIN 6923’, ‘DIN 985’]
For the official DIN standards catalogue, see the DIN standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce DIN 6926 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Prevailing-torque hexagon flange nuts with non-metallic (nylon/polyamide) insert, aligned with ISO 7043. Same across-flats and flange diameter as DIN 6923 but taller to house the locking ring. Common range M5-M20.
Ananka Fasteners manufactures DIN 6926 in sizes from M5–M20. See the Dimensional Table above for the complete size breakdown.
6H (internal metric ISO thread)
We produce DIN 6926 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to DIN 6926 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: DIN 6926 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per DIN 6926 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
