INCONEL 600 HEX BOLTS - UNS N06600 / WNR 2.4816
■ Dimensions in mm (DIN 931 / DIN 933 / ISO 4014)
| THREAD (d) |
PITCH |
WIDTH ACROSS FLATS (s) |
HEAD HEIGHT (k) |
STRESS AREA (mm²) |
| M6 |
1.00 |
10.00 |
4.00 |
20.10 |
| M8 |
1.25 |
13.00 |
5.30 |
36.60 |
| M10 |
1.50 |
17.00 |
6.40 |
58.00 |
| M12 |
1.75 |
19.00 |
7.50 |
84.30 |
| M16 |
2.00 |
24.00 |
10.00 |
157.00 |
| M20 |
2.50 |
30.00 |
12.50 |
245.00 |
| M24 |
3.00 |
36.00 |
15.00 |
353.00 |
Note: Contact Ananka Group for ASME B18.2.1 imperial sizes, extended lengths up to 1000mm, or specialized threading (UNC/UNF). ISO dimensional variants (e.g., ISO 4017 WAF differences) are available upon request.
■ Bolt-Specific Technical Specifications
| Material |
Inconel 600 (Nickel-Chromium-Iron Solid-Solution Alloy) |
| Standard / Classification |
UNS N06600 | W.Nr. 2.4816 | ASTM F468
- Density: 8.47 g/cm³ (0.306 lb/in³)
- Melting Point: 1354 - 1413°C (2470 - 2575°F)
- Non-Magnetic: Curie Temperature -124°C
|
| Bolt Mechanical Properties (Ambient) |
- Tensile Strength: 80,000 - 100,000 psi (550 - 690 MPa)
- Yield Strength: 37,000 - 45,000 psi (255 - 310 MPa)
- Elongation (%): 35% - 55%
|
| High-Temperature Performance |
Retains exceptional structural integrity and resists oxidation up to 2000°F (1095°C). Forms a tightly adhering, passivating chromium oxide. |
| Torque & Installation Guidelines |
To prevent thread galling during tightening, Molybdenum Disulfide lubricants are strictly recommended over nickel-based pastes. For critical anti-galling joints, utilize Nitronic 60 mating nuts. |
| Primary Bolt Applications |
Securing load-bearing joints in extreme environments: furnace muffles, gas turbine casings, high-pressure nuclear reactor vessels, and cryogenic LNG tanks. Total immunity to chloride-ion stress-corrosion cracking (SCC). |
