Alloy A286 Socket Head Cap Screw – DIN 912 – ASTM A453 Gr 660

At Ananka Fasteners Pvt Ltd, we engineer, manufacture, and supply premium Alloy A286 (UNS S66286) Socket Head Cap Screw built for demanding service. Fe-Ni-Cr precipitation-hardened superalloy for high-strength bolting to 700°C; governed by ASTM A453/A638 Grade 660. This technical datasheet covers the precise dimensional tolerances per DIN 912 and the material requirements dictated by ASTM A453 Gr 660 and ASTM A638 Gr 660.

A Alloy A286 Socket Screw uses an internal hexagonal drive and is suitable for assemblies where a compact socket-head design is preferred. The tables below provide the principal dimensions, equivalent material grades, chemical composition and mechanical properties covered by the technical data for this product.

1. Alloy A286 Socket Head Cap Screw Specifications

Our socket head cap screws are manufactured in standard and custom configurations, ensuring a precise fit for demanding structural, piping, and chemical-process applications.

2. DIN 912 Socket Head Cap Screw Dimensions

The DIN 912 specification governs the physical geometry of this product. The tolerances below ensure a secure, reliable mate under service loads. DIN 912 governs metric socket head cap screws driven by an internal hex key.

Thread and Drive Configuration

The socket head design provides an internal hexagonal drive for assembly with an appropriate Allen or hex key. Buyers should confirm the required nominal diameter, thread series, length and socket size against the purchase drawing or applicable standard before ordering.

3. Alloy A286 Equivalent Grades

The UNS S66286 Socket Head Cap Screw is manufactured from Alloy A286, a high-nickel alloy. The equivalent designations below assist with cross-referencing this material against European, British and other national standards.

4. ASTM A453 Gr 660 Material Requirements

This section details the chemical composition limits and minimum mechanical properties governing Alloy A286 (UNS S66286) fasteners, as dictated by ASTM A453 Gr 660 (chemistry & mechanicals) and the raw bar/rod standard ASTM A638 Gr 660.

■ Chemical Composition

■ Mechanical Properties

5. Socket Head Cap Screw Applications

Our Alloy A286 socket head cap screws are specified across the following industries and service conditions, drawing on the material’s core strengths:

• Aerospace Fasteners: High-strength bolts and studs in jet engines.
• Gas Turbines: Fasteners retaining strength at elevated temperature.
• Oil & Gas: Non-magnetic high-strength downhole hardware.
• Power Generation: Turbine and compressor bolting.

For severe sour, high-temperature or highly acidic service, the exact operating conditions should be reviewed against the alloy’s certified data rather than general nickel-alloy assumptions.

6. Manufacturing, Inspection and Quality Assurance

Every batch of Socket Head Cap Screws produced undergoes rigorous internal and third-party testing to ensure zero-defect delivery. We supply complete traceability with our global shipments.

• Material Test Certificates (MTC): Provided strictly as per EN 10204 3.1 / EN 10204 3.2.
• Non-Destructive Testing (NDT): Positive Material Identification (PMI), Visual Inspection, Dimensional Checks, and Micro/Macro testing.
• Destructive Testing: Tensile tests, hardness testing, chemical analysis, and (where applicable) intergranular corrosion (IGC) tests.

For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.

7. Standards and Technical References

This datasheet references DIN 912 for dimensional requirements and ASTM A453 Gr 660 for material and fastener requirements. The applicable standard edition and purchase requirements should be confirmed for every project.

For DIN standards information, see the DIN standards catalogue. For ASTM International material and fastener specifications, see the ASTM International standards catalogue. These external references are provided for standards identification; the purchaser should verify the current edition applicable to the order.

8. Frequently Asked Questions

What is a Alloy A286 Socket Head Cap Screw?

A Alloy A286 Socket Head Cap Screw is an internally hex-driven cap screw manufactured from Alloy A286 (UNS S66286). The product combines the DIN 912 dimensional geometry with the ASTM A453 Gr 660 material and fastener requirements.

What standard is used for the Alloy A286 Socket Head Cap Screw dimensions?

The dimensional information in this datasheet is based on DIN 912, which governs the physical geometry of this product. The table above provides the principal dimensions listed for the Alloy A286 product range.

What is the material designation of Alloy A286?

Alloy A286 is identified as UNS S66286. The equivalent designations listed in this datasheet include Werkstoff Nr. 1.4980, EN X5NiCrTi26-15, British Standard HR51, Z6 NCT 25 (AFNOR).

Is Alloy A286 suitable for corrosive or demanding service?

Alloy A286 is a high-nickel alloy known for excellent resistance to high-temperature oxidation and aggressive chemical environments. For severe sour, high-temperature or highly acidic service, the exact operating conditions should be reviewed against the alloy’s certified data rather than general nickel-alloy assumptions.

Can Ananka Fasteners supply custom Alloy A286 Socket Head Cap Screws?

The product information supports standard and custom configurations. For a quotation, provide the required material grade, nominal size, dimensional requirement, quantity, standard and any inspection or certificate requirements.

9. Request a Alloy A286 Socket Head Cap Screw Quote

Need a Alloy A286 Socket Head Cap Screw for an industrial project? Send the required size, quantity, standard and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.

Recommended RFQ details: Alloy A286 / UNS S66286, nominal size, DIN 912 requirement, quantity, inspection requirements and EN 10204 certificate requirements where applicable.