Silicon Bronze C65800 Fasteners
SILICON BRONZE C65800 FASTENERS | ULTIMATE GUIDE & MANUFACTURER
Ananka Fasteners is a premier manufacturer and supplier of high-quality Silicon Bronze C65800 Fasteners (UNS C65800). Renowned for superior corrosion resistance, high mechanical strength, and excellent formability, this high-silicon bronze alloy is frequently specified as an alternative to stainless steel in severe marine and chemical environments, offering a unique combination of toughness and aesthetic appeal.
■ Complete Range of Silicon Bronze C65800 Fasteners
As a master manufacturer, we produce a comprehensive range of C65800 fasteners spanning from marine hardware to precision electrical and architectural components.
| Bolts & Screws | Nuts & Washers | Studs & Rods |
|---|---|---|
| Hex Bolts / Hex Cap Screws | Hex Nuts / Heavy Hex Nuts | Continuous Thread Studs |
| Socket Head Cap Screws | Jam Nuts / Acorn Nuts | Double End Studs |
| Carriage Bolts / Machine Screws | Flat Washers / Lock Washers | Threaded Rods / Grounding Rods |
| Set Screws / Sheet Metal Screws | Custom CNC Machined Nuts | Custom CNC Machined Studs |
■ Silicon Bronze C65800 Material Specifications
| Material Equivalent Grades | UNS C65800 | High-Silicon Bronze | Copper-Silicon Alloy |
|---|---|
| Standard Specifications | ASTM F468 (Nonferrous Bolts, Hex Cap Screws & Studs) ASTM F467 (Nonferrous Nuts) ASTM B98 / B98M (Copper-Silicon Alloy Rod, Bar & Shapes) |
| Size Range | Metric: M3 to M100 | Imperial: 1/8" to 4" Custom machined lengths available on request. |
| Thread Types | UNC, UNF, Metric Coarse, Metric Fine, BSW, BSF |
| Dimensional Standards | ASME B18.2.1 (Hex Bolts & Cap Screws), ASME B18.2.2 (Heavy Hex Nuts), ASME B18.3 (Socket Head Cap Screws), ASME B18.21.1 (Washers) |
■ Chemical Composition of C65800
| Cu (Copper) | Si (Silicon) | Mn (Manganese) | Ni/Co (Nickel/Cobalt) | Fe (Iron) | Pb (Lead) |
|---|---|---|---|---|---|
| ~95% Min (Remainder) | 2.50 - 3.80% | 1.30% Max | 0.60% Max | 0.25% Max | 0.05% Max |
■ Mechanical & Physical Properties
| Tensile Strength | Yield Strength (0.2% Offset) | Elongation (in 4D) | Hardness (Rockwell) |
|---|---|---|---|
| 50 - 80 ksi (345 - 550 MPa) | 15 - 50 ksi (105 - 345 MPa) | 20% Min | 60 - 80 HRF (Typical) |
| Density | 0.308 lbs/cu in (8.53 g/cm³) |
|---|---|
| Melting Range | 1854 - 1908°F (1012 - 1042°C) |
| Electrical Conductivity | 7% IACS (Annealed) |
| Magnetic Permeability | Non-Magnetic |
Note: Properties can vary based on the manufacturing process (hot formed vs. cold worked) and nominal thread diameter, as outlined in ASTM F468.
■ Key Characteristics & Industrial Applications
Silicon Bronze C65800 combines high mechanical strength with outstanding corrosion resistance, making it a trusted alternative to stainless steel in the most demanding marine, chemical, and electrical environments.
- Corrosion Resistance: Highly resistant to saltwater, brine, and various chemicals, outperforming standard brass and even some stainless grades in anoxic marine conditions.
- Anti-Galling Properties: Unlike stainless steel, silicon bronze fasteners are highly resistant to thread galling (cold welding) during installation under heavy loads.
- Non-Magnetic & Conductive: Ideal for electrical applications and switchgear where magnetic interference must be avoided and conductivity is preferred.
- Aesthetics: Develops a rich, protective patina over time, making it highly desirable in architectural applications, boat restoration, and outdoor wood construction.
■ Primary Industries Served
- Marine: Shipbuilding, dock construction, and below-waterline hardware.
- Power Generation: Switchgear, grounding hardware, and electrical connections requiring non-magnetic properties.
- Waterworks & Plumbing: Water treatment facilities, valve and pump assemblies.
- Chemical Processing: Fastening solutions for equipment exposed to corrosive process chemicals.