At Ananka Fasteners Pvt Ltd, we manufacture and supply fasteners certified to ASTM A836. Titanium-stabilized carbon steel forgings for glass-lined piping and pressure vessel service. Titanium stabilization (Ti >= 4x carbon, 1.00% max) prevents decarburization and supports the glass-fusing (enameling) heat cycles. Single grade; as-forged fittings, valve bodies and flange components.
Titanium-stabilized carbon steel forgings for glass-lined piping and pressure vessel service. Titanium stabilization (Ti >= 4x carbon, 1.00% max) prevents decarburization and supports the glass-fusing (enameling) heat cycles. Single grade; as-forged fittings, valve bodies and flange components.
| Grade / Class | UNS / Designation | Type / Notes |
|---|---|---|
| F5N (single grade) | – | Ti-stabilized carbon steel for glass lining |
Minimum mechanical requirements per ASTM A836.
| Grade / Class / Condition | Tensile Strength, min | Yield Strength, min | Elongation, min % | Hardness |
|---|---|---|---|---|
| Ti-stabilized carbon steel | 55 (380) | 25 (175) | 22 | 35% RA min |
| Grade | Key Composition, % |
|---|---|
| Ti-stabilized carbon steel | C low, Mn, Si, P/S limited; Ti >= 4x C content, 1.00% max (stabilizing addition) |
ASME SA836; conceptually related to Ti-stabilized 321-type stabilization applied to carbon steel forgings for enamelling
For the official ASTM International standards catalogue, see the ASTM International standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We supply ASTM A836 fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Titanium-stabilized carbon steel forgings for glass-lined piping and pressure vessel service. Titanium stabilization (Ti >= 4x carbon, 1.00% max) prevents decarburization and supports the glass-fusing (enameling) heat cycles. Single grade; as-forged fittings, valve bodies and flange components.
Ananka Fasteners supplies F5N (single grade) to ASTM A836. See the Grades / Classes Covered table above for full details of each grade.
Minimum tensile strength, yield strength, elongation and hardness requirements vary by grade — see the Mechanical Properties table above for the complete breakdown.
We supply ASTM A836 fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
Yes. For a quotation, provide the required fastener type, grade, nominal size, dimensional standard, quantity and any inspection or certificate requirements.
Need a fastener released to ASTM A836 for an industrial project? Send the required fastener type, grade, size, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ASTM A836 requirement, material grade, fastener type, nominal size, dimensional standard, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Data compiled per ASTM A836 and industry references; provided for reference only — confirm against the current edition of the standard and certified mill test reports before design use.
