At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of DIN 927. DIN 927 specifies slotted headless set screws with full dog point (shoulder-type set screw). The extended dog point locates in a mating hole/recess so the screw acts as a pivot or stop; straight slot drive, no head above the shoulder. Typically steel case-hardened or stainless.
DIN 927 specifies slotted headless set screws with full dog point (shoulder-type set screw). The extended dog point locates in a mating hole/recess so the screw acts as a pivot or stop; straight slot drive, no head above the shoulder. Typically steel case-hardened or stainless.
slotted set screw with full dog point (shoulder)
Key dimensions for common sizes are listed below.
| Nominal Size | Thread Pitch P (mm) | Dog Point Dia dp (mm) | Slot Width n (mm) | Slot Depth t (mm) |
|---|---|---|---|---|
| M1.6 | 0.35 | 2.2 | 0.3 | 0.74 |
| M2 | 0.4 | 2.8 | 0.3 | 0.84 |
| M2.5 | 0.45 | 3.5 | 0.4 | 0.95 |
| M3 | 0.5 | 4.0 | 0.5 | 1.05 |
| M4 | 0.7 | 5.5 | 0.6 | 1.42 |
| M5 | 0.8 | 6.5 | 0.8 | 1.63 |
| M6 | 1.0 | 8.0 | 1.0 | 2.0 |
6g (external thread)
[‘DIN 923’, ‘DIN 417’, ‘DIN 553’, ‘DIN 438’]
For the official DIN standards catalogue, see the DIN standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce DIN 927 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
DIN 927 specifies slotted headless set screws with full dog point (shoulder-type set screw). The extended dog point locates in a mating hole/recess so the screw acts as a pivot or stop; straight slot drive, no head above the shoulder. Typically steel case-hardened or stainless.
Ananka Fasteners manufactures DIN 927 in sizes from M1.6–M6. See the Dimensional Table above for the complete size breakdown.
6g (external thread)
We produce DIN 927 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to DIN 927 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: DIN 927 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per DIN 927 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
