At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of ASME B18.2.3.4M. ASME B18.2.3.4M covers the dimensional requirements for metric series hex flange screws — hex-head screws with an integral washer-like flange under the head that spreads the bearing load. It defines flange (bearing) diameter, width across flats and head height. The standard covers the common size range M5 through M16.
ASME B18.2.3.4M covers the dimensional requirements for metric series hex flange screws — hex-head screws with an integral washer-like flange under the head that spreads the bearing load. It defines flange (bearing) diameter, width across flats and head height. The standard covers the common size range M5 through M16.
A hex flange screw: a hex-head screw with a conical or flat integral flange beneath the head, eliminating the need for a separate washer and increasing bearing area.
Key dimensions for common sizes are listed below.
| Nominal Size | Flange Diameter (mm) | Width Across Flats (mm) | Head Height (mm) |
|---|---|---|---|
| M5 | 11.4 | 7.00 | 5.60 |
| M6 | 13.6 | 8.00 | 6.90 |
| M8 | 17.0 | 10.00 | 8.50 |
| M10 | 20.8 | 13.00 | 9.70 |
| M12 | 24.7 | 15.00 | 12.10 |
| M14 | 28.6 | 18.00 | 12.90 |
| M16 | 32.8 | 21.00 | 15.20 |
Metric coarse threads per ASME B1.13M, external thread tolerance class 6g.
Related to ASME B18.2.3.9M metric heavy hex flange screws and comparable to ISO 4162 / DIN 6921 hex flange screws.
For the official ASME standards catalogue, see the ASME standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce ASME B18.2.3.4M fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
ASME B18.2.3.4M covers the dimensional requirements for metric series hex flange screws — hex-head screws with an integral washer-like flange under the head that spreads the bearing load. It defines flange (bearing) diameter, width across flats and head height. The standard covers the common size range M5 through M16.
Ananka Fasteners manufactures ASME B18.2.3.4M in sizes from M5–M16. See the Dimensional Table above for the complete size breakdown.
Metric coarse threads per ASME B1.13M, external thread tolerance class 6g.
We produce ASME B18.2.3.4M fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to ASME B18.2.3.4M for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ASME B18.2.3.4M requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per ASME B18.2.3.4M and industry references; provided for reference only — confirm against the current edition of the standard before design use.
