Table of Contents

All Inclusive Guide ASTM A193 Grade B8LN Bolt & Nut

Ananka Group is one of the prominent company names in the field, and it is leading manufacturer and supplier of fasteners that produce and offer ASTM A193 Grade B8LN fasteners. With a premium reputation built within the scope of global markets, Ananka Group has solidly established its market position with products carefully designed to meet the demands of wide-ranged industries like aerospace, power generation, chemical processing, marine engineering, and more.

ASTM A193 Grade B8LN is a specification of high tensile bolts, screws, stud bolts, anchor bolts, threaded rods, and other externally threaded fasteners made from 304LN stainless steel. The material has excellent mechanical properties and corrosion resistance properties, which makes the material widely demanded for numerous types of industrial applications that especially need high strength and durability.

What is ASTM A193 Grade B8LN?

ASTM A193 is a standard specification developed by the American Society for Testing and Materials (ASTM) for alloy-steel and stainless-steel bolting materials for high-temperature or high-pressure service and other special-purpose applications. The “B8LN” grade refers specifically to bolts made from 304LN stainless steel.

304LN Stainless Steel. It is a sub-group of low-carbon variant of 304 stainless steel, the material nitrogen-stabilized after. This is done to increase its strength and resilience to corrosion. In this context, “LN” indicates that this steel has low carbon in relation to “L” and it is stabilized by adding nitrogen (N). Such modification helps to avoid carbide precipitation while welding, enhancing the weld’s performance primarily in such processes or applications where the welding takes place.

Chemical Composition

The chemical composition of ASTM A193 Grade B8LN is the most important in the properties:

Carbon (C): ≤ 0.03%

Manganese (Mn): ≤ 2.00%

Silicon (Si): ≤ 1.00%

Phosphorus (P): ≤ 0.045%

Sulfur (S): ≤ 0.030%

Chromium (Cr): 18.00 – 20.00%

Nickel: – 8.00% – 12.00%

Nitrogen (N): 0.10 – 0.16%

The low carbon content minimizes the chances of intergranular corrosion, whereas nitrogen addition increases tensile strength.

Mechanical Properties

Fasteners ASTM A193 GRADE B8LN show remarkable mechanical properties:

Tensile Strength: Minimum of 75,000 psi (515 MPa).

Yield Strength: minimum 30,000 psi (205 MPa).

Elongation: At least 35%

Brinell hardness: Not more than 223 HB.

These properties make the grade B8LN appropriate for use in demanding environments, like chemical processing plants, oil refineries etc, since it can withstand high-pressure and high-temperature conditions in such industries.

Applications of ASTM A193 Grade B8LN

Petrochemical and Chemical Processing: Such excellent corrosion resistance and very high tensile strength of B8LN have made it useful in chemical and petrochemical plants, especially in exposure to aggressive chemicals and at extreme temperature applications.

Offshore and Onshore: drilling operations require these fasteners to be used, as they perform under high pressure and corrosive environments.

Nuclear and Power Plants: The material’s resistance to heat and radiation makes it suitable for power generation facilities, particularly in nuclear reactors where stability and strength are critical.

Food processing Equipment: 304LN stainless steel can be of great use in food processing because it does not corrode quickly and is easily cleaned, which is important for hygiene.

Benefits of ASTM A193 Grade B8LN

Corrosion Resistance: The high chromium and nickel content ensures superior resistance to corrosion, especially in harsh environments.

Weldability: The low carbon content reduces the risk of carbide precipitation, making it suitable for welding operations without compromising material integrity.

High Strength: The addition of nitrogen boosts the tensile strength, providing enhanced durability and resilience.

Versatility: Can be used in numerous applications from chemical and petrochemical to food processing and power generation.

Comparison to Other Grades

While the grades of ASTM A193 are numerous, there are certain benefits to grade B8LN over others:

B8: B8 is also made from 304 stainless steel, but it is not nitrogen-enhanced. Nitrogen added to B8LN makes it stronger.

B8M: Made from 316 stainless steel, B8M offers better corrosion resistance, especially in chloride environments. However, B8LN has superior tensile strength, making it better suited for high-pressure applications.

Conclusion

Applications involving industrial demand for high tensile strength while offering the best corrosion resistance must make use of ASTM A193 Grade B8LN Fasteners. The low carbon and nitrogen-enhanced composition of 304LN stainless steel ensures durability, weldability, and resistance against the harshest chemical compounds in even the most exacting environments like petrochemical plants, power generation facilities, or food processing equipment. Thus, the properties and benefits of ASTM A193 Grade B8LN ensure the proper selection of fasteners for demanding applications.

ASTM A193 Grade B8LN Bolt and Nuts Manufacturer

We supply our fastener to top cities, We are a top ASTM A193 Grade B8LN Fasteners Manufacturer in Mumbai. We are also a ASTM A193 Grade B8LN Fasteners Manufacturer in India, We have supplied our fastener to Mumbai, Chennai, Kolkata, Pune and other popular cities.

The city we supply ASTM A193 Grade B8LN Bolt, Nuts, Washers:
Bengaluru	Mumbai	Chennai	Hyderabad	Kolkata	Pune
New Delhi	Ahmedabad	Jaipur	Surat	Salem	Gandhinagar
Bhiwandi	Tiruppur	Sivakasi	Jamnagar	Thiruvananthapuram	Rajahmundry
Bhubaneswar	Vijaywada	Firozabad	Bokaro Steel City	Rajkot	Bharuch
Panna	Raipur	Cochin	Ludhiana	Panipat	Durgapur
Peenya	Pimpri-Chinchwad	Channapatna	Kharagpur	Nashik	Bareilly
Varanasi	Haldia	Rourkela	Bangalore	Moradabad	Indore
Visakhapatnam	Trivandrum	Pithampur	Dibrugarh	Angul	Gwalior
Coimbatore	Kannur	Nagpur	Vadodara	Rudrapur	Noida
Agra	Bhagalpur	Jamshedpur	Bhilai	Lucknow	Kanpur
Thane	Bhopal	Sri City	Bareilly	Hosdurg	Pithampur

ASTM A193 Grade B8LN Bolt, Nuts, Washers Manufacturer

We have exported ASTM A193 Grade B8LN Bolt, Nuts, Washers to popular international countries such as Saudi Arabia, Oman, Kuwait, Netherlands, etc. We are a leading ASTM A193 Grade B8LN Bolt Manufacturer and ASTM A193 Grade B8LN Nut Manufacturer.

Countries we supply and export ASTM A193 Grade B8LN Bolt, Nuts, Washers worldwide:
Saudi Arabia	Oman	Europe	Netherlands	Sweden
Kenya	Ireland	Israel	South Africa	Afghanistan
Zimbabwe	Mexico	Canada	Venezuela	United Kingdom
United States	New Zealand	Malaysia	Bangladesh	Turkey
Singapore	Sri Lanka	Australia	Brazil	Germany
France	Italy	South Korea	Poland	Belgium

FAQ

1. What is ASTM A193 Grade B8LN used for?

ASTM A193 Grade B8LN is used for making high-tensile bolts, screws, stud bolts, threaded rods, and other externally threaded fasteners, mainly in high-pressure and high-temperature applications.

2. How does B8LN differ from B8?

B8LN differs from B8 in that it includes nitrogen (N) in its composition, enhancing its strength compared to standard B8 bolts made from 304 stainless steel without nitrogen.

3. Can B8LN fasteners be welded?

Yes, B8LN fasteners can be welded. The low carbon content reduces the risk of carbide precipitation during welding, making it suitable for welding without compromising corrosion resistance.

4. Is ASTM A193 Grade B8LN suitable for food processing equipment?

Yes, due to its excellent corrosion resistance and durability, B8LN is suitable for food processing equipment, ensuring hygiene and longevity in such applications.

5. Are B8LN fasteners resistant to chloride environments?

While B8LN offers good general corrosion resistance, it is less effective against chloride environments than B8M (316 stainless steel). For environments with high chloride exposure, B8M may be more appropriate.