At Ananka Fasteners Pvt Ltd, we manufacture and supply fasteners certified to ASTM B127. Nickel-copper alloy (Monel 400, UNS N04400) plate, sheet and strip. Non-hardenable, high seawater/acid corrosion resistance; plate feeds stamped washers, gaskets and backing plates. Metric-friendly spec (values ksi with (MPa) as published).
Nickel-copper alloy (Monel 400, UNS N04400) plate, sheet and strip. Non-hardenable, high seawater/acid corrosion resistance; plate feeds stamped washers, gaskets and backing plates. Metric-friendly spec (values ksi with (MPa) as published).
| Grade / Class | UNS / Designation | Type / Notes |
|---|---|---|
| Monel 400 | N04400 | Ni-Cu 67/30 alloy, plate/sheet/strip |
Minimum mechanical requirements per ASTM B127.
| Grade / Class / Condition | Tensile Strength, min | Yield Strength, min | Elongation, min % | Hardness |
|---|---|---|---|---|
| Annealed | 70 (485) | 28 (195) | 35 | ~65-80 HRB |
| As-rolled / hot-rolled | 75-90 (515-620) | 40 (275) | 20 | ~90 HRB |
| Grade | Key Composition, % |
|---|---|
| N04400 | Ni 63.0 min, Cu 28.0-34.0, Fe 2.5 max, Mn 2.0 max, C 0.3 max, S 0.024 max |
UNS N04400; ASME SB127; Monel 400 = 2.4360 / NiCu30Fe; bar/rod ASTM B164, forgings B564
For the official ASTM International standards catalogue, see the ASTM International standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We supply ASTM B127 fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Nickel-copper alloy (Monel 400, UNS N04400) plate, sheet and strip. Non-hardenable, high seawater/acid corrosion resistance; plate feeds stamped washers, gaskets and backing plates. Metric-friendly spec (values ksi with (MPa) as published).
Ananka Fasteners supplies Monel 400 to ASTM B127. See the Grades / Classes Covered table above for full details of each grade.
Minimum tensile strength, yield strength, elongation and hardness requirements vary by grade — see the Mechanical Properties table above for the complete breakdown.
We supply ASTM B127 fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
Yes. For a quotation, provide the required fastener type, grade, nominal size, dimensional standard, quantity and any inspection or certificate requirements.
Need a fastener released to ASTM B127 for an industrial project? Send the required fastener type, grade, size, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ASTM B127 requirement, material grade, fastener type, nominal size, dimensional standard, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Data compiled per ASTM B127 and industry references; provided for reference only — confirm against the current edition of the standard and certified mill test reports before design use.
