At Ananka Fasteners Pvt Ltd, we manufacture and supply fasteners certified to ASTM F3042. REFINEMENT: ASTM F3042 covers NONFERROUS hex socket, slotted headless, and square head set screws, sizes #5 (0.125 in) through 2.000 in, in copper, nickel and titanium alloys for marine and general service. (Input omitted that the standard is specifically nonferrous.)
REFINEMENT: ASTM F3042 covers NONFERROUS hex socket, slotted headless, and square head set screws, sizes #5 (0.125 in) through 2.000 in, in copper, nickel and titanium alloys for marine and general service. (Input omitted that the standard is specifically nonferrous.)
| Grade / Class | UNS / Designation | Type / Notes |
|---|---|---|
| Brass | UNS C26000 / C27000 / C27400 | Copper-zinc |
| Naval brass | UNS C46200 / C46400 | Cu-Zn-Sn marine |
| Aluminum bronze | UNS C61300 / C61400 / C63000 | Cu-Al |
| Silicon bronze | UNS C65100 / C65500 / C66100 | Cu-Si |
| Nickel-copper (Monel) | UNS N04400 / N04405 | Ni-Cu Class A/B |
| Ni-Cu-Al (K-500) | UNS N05500 | Age-hardened Ni-Cu-Al |
| Nickel alloy 625 | UNS N06625 | Ni-Cr-Mo-Nb |
| Titanium Ti-6Al-4V ELI | UNS R56401 | Ti alloy |
Minimum mechanical requirements per ASTM F3042.
| Grade / Class / Condition | Tensile Strength, min | Yield Strength, min | Elongation, min % | Hardness |
|---|---|---|---|---|
| Copper-alloy set screws | per alloy/temper | per alloy/temper | n/a | 55-100 HRB |
| Nickel-alloy set screws | per alloy/temper | per alloy/temper | n/a | 60 HRB – 45 HRC |
| Titanium-alloy set screws | per alloy/temper | per alloy/temper | n/a | 24-38 HRC |
| Ni-Cu-Al N05500 (aged) | 130 ksi (895 MPa) typ | 85 ksi (585 MPa) typ | n/a | 27-35 HRC |
| Grade | Key Composition, % |
|---|---|
| C46400 naval brass | Cu 59-62, Sn 0.5-1.0, Zn bal |
| N04400 Monel 400 | Ni 63 min, Cu 28-34, Fe <=2.5 |
| N05500 Monel K-500 | Ni 63 min, Cu 27-33, Al 2.3-3.15, Ti 0.35-0.85 |
| R56401 Ti-6Al-4V ELI | Ti bal, Al 5.5-6.5, V 3.5-4.5, low interstitial |
Nonferrous counterpart to ASTM F912 / ASME B18.3 (ferrous socket set screws); dimensions per ASME B18.3/B18.6.3
For the official ASTM International standards catalogue, see the ASTM International standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We supply ASTM F3042 fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
REFINEMENT: ASTM F3042 covers NONFERROUS hex socket, slotted headless, and square head set screws, sizes #5 (0.125 in) through 2.000 in, in copper, nickel and titanium alloys for marine and general service. (Input omitted that the standard is specifically nonferrous.)
Ananka Fasteners supplies Brass, Naval brass, Aluminum bronze, Silicon bronze, Nickel-copper (Monel), Ni-Cu-Al (K-500), Nickel alloy 625, Titanium Ti-6Al-4V ELI to ASTM F3042. See the Grades / Classes Covered table above for full details of each grade.
Minimum tensile strength, yield strength, elongation and hardness requirements vary by grade — see the Mechanical Properties table above for the complete breakdown.
We supply ASTM F3042 fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
Yes. For a quotation, provide the required fastener type, grade, nominal size, dimensional standard, quantity and any inspection or certificate requirements.
Need a fastener released to ASTM F3042 for an industrial project? Send the required fastener type, grade, size, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ASTM F3042 requirement, material grade, fastener type, nominal size, dimensional standard, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Data compiled per ASTM F3042 and industry references; provided for reference only — confirm against the current edition of the standard and certified mill test reports before design use.
