At Ananka Fasteners Pvt Ltd, we manufacture and supply fasteners certified to ASTM F3329. Standard specification for carbon and alloy steel metric rivets. Covers chemical, mechanical and dimensional requirements for solid steel rivets in the metric series intended for structural and general assembly riveting. Rivets are supplied for hot or cold driving depending on grade and size.
Standard specification for carbon and alloy steel metric rivets. Covers chemical, mechanical and dimensional requirements for solid steel rivets in the metric series intended for structural and general assembly riveting. Rivets are supplied for hot or cold driving depending on grade and size.
| Grade / Class | UNS / Designation | Type / Notes |
|---|---|---|
| Grade 1 | Low/medium carbon steel | General-purpose steel rivets |
| Grade 2 | Carbon steel | Higher-strength structural rivets |
| Grade 3 | Alloy steel | Heat-treatable higher-strength rivets |
Minimum mechanical requirements per ASTM F3329.
| Grade / Class / Condition | Tensile Strength, min | Yield Strength, min | Elongation, min % | Hardness |
|---|---|---|---|---|
| Grade 1 (carbon) | min ~415 MPa (60 ksi) | n/a (rivet) | n/a | Per grade, shear-governed |
| Grade 2/3 (higher strength) | min ~585-830 MPa (85-120 ksi) | n/a (rivet) | n/a | Per grade |
| Grade | Key Composition, % |
|---|---|
| Carbon grades | Low/medium C steel, Mn to suit; P and S controlled (typ. 0.05 max) |
| Alloy grade | Alloy steel with Cr/Mo for higher strength/hardenability |
Metric companion to inch rivet practice in ASTM A502 (structural steel rivets); dimensions per applicable metric rivet dimensional standards.
For the official ASTM International standards catalogue, see the ASTM International standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We supply ASTM F3329 fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Standard specification for carbon and alloy steel metric rivets. Covers chemical, mechanical and dimensional requirements for solid steel rivets in the metric series intended for structural and general assembly riveting. Rivets are supplied for hot or cold driving depending on grade and size.
Ananka Fasteners supplies Grade 1, Grade 2, Grade 3 to ASTM F3329. See the Grades / Classes Covered table above for full details of each grade.
Minimum tensile strength, yield strength, elongation and hardness requirements vary by grade — see the Mechanical Properties table above for the complete breakdown.
We supply ASTM F3329 fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
Yes. For a quotation, provide the required fastener type, grade, nominal size, dimensional standard, quantity and any inspection or certificate requirements.
Need a fastener released to ASTM F3329 for an industrial project? Send the required fastener type, grade, size, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ASTM F3329 requirement, material grade, fastener type, nominal size, dimensional standard, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Data compiled per ASTM F3329 and industry references; provided for reference only — confirm against the current edition of the standard and certified mill test reports before design use.
