At Ananka Fasteners Pvt Ltd, we manufacture and supply fasteners certified to ASTM F468/F468M. Standard specification covering the chemical and mechanical requirements for nonferrous (copper-, nickel-, aluminum- and titanium-based alloy) bolts, hex cap screws, socket head cap screws and studs for general corrosion-resistant use, in inch (F468) and metric (F468M) series.
Standard specification covering the chemical and mechanical requirements for nonferrous (copper-, nickel-, aluminum- and titanium-based alloy) bolts, hex cap screws, socket head cap screws and studs for general corrosion-resistant use, in inch (F468) and metric (F468M) series.
| Grade / Class | UNS / Designation | Type / Notes |
|---|---|---|
| F468D | C46400 | Naval brass |
| F468H | C63000 | Aluminum bronze |
| F468K | C65100 | Low-silicon bronze |
| F468L | C65500 | High-silicon bronze |
| F468U | N04400 | Nickel-copper Alloy 400 (Monel) |
| F468V | N04405 | Nickel-copper Alloy 405 (free-machining) |
| F468W | N05500 | Nickel-copper-aluminum Alloy K-500 |
| F468AC | N06625 | Nickel-chromium Alloy 625 |
Minimum mechanical requirements per ASTM F468/F468M.
| Grade / Class / Condition | Tensile Strength, min | Yield Strength, min | Elongation, min % | Hardness |
|---|---|---|---|---|
| F468D Naval Brass C46400 | 50 (345) | 15 (103) | 25 | 55-75 HRF |
| F468H Al-Bronze C63000 | 100 (690) | 50 (345) | 5 | 85-100 HRF |
| F468K Si-Bronze C65100 | 70 (483) | 55 (379) | 8 | 75-95 HRF |
| F468L Si-Bronze C65500 | 50 (345) | 20 (138) | 20 | 60-80 HRF |
| F468U Alloy 400 N04400 | 80 (552) | 40 (276) | 20 | 75 HRB-25 HRC |
| F468V Alloy 405 N04405 | 70 (483) | 30 (207) | 20 | 60 HRB-20 HRC |
| F468W Alloy K-500 N05500 | 130 (896) | 90 (621) | 20 | 24-37 HRC |
| F468AC Alloy 625 N06625 | 120 (827) | 60 (414) | 30 | 85 HRB-35 HRC |
| Grade | Key Composition, % |
|---|---|
| Naval Brass C46400 | Cu 59-62, Zn bal, Sn 0.5-1.0 |
| Si Bronze C65500 | Cu bal, Si 2.8-3.8, Mn 0.5-1.3 |
| Alloy 400 N04400 | Ni 63 min, Cu 28-34, Fe 2.5 max, Mn 2.0 max |
| Alloy 405 N04405 | Ni 63 min, Cu 28-34, S 0.025-0.060 (free-machining) |
| Alloy K-500 N05500 | Ni 63 min, Cu 27-33, Al 2.3-3.15, Ti 0.35-0.85 |
| Alloy 625 N06625 | Ni 58 min, Cr 20-23, Mo 8-10, Nb 3.15-4.15 |
Companion bolt standard to ASTM F467 (nonferrous nuts). Dimensions per ASME B18.2.1; alloys correspond to ASTM B wrought specs (B98 silicon bronze, B164 nickel-copper, B446 Alloy 625, B21 naval brass).
For the official ASTM International standards catalogue, see the ASTM International standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We supply ASTM F468/F468M fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Standard specification covering the chemical and mechanical requirements for nonferrous (copper-, nickel-, aluminum- and titanium-based alloy) bolts, hex cap screws, socket head cap screws and studs for general corrosion-resistant use, in inch (F468) and metric (F468M) series.
Ananka Fasteners supplies F468D, F468H, F468K, F468L, F468U, F468V, F468W, F468AC to ASTM F468/F468M. See the Grades / Classes Covered table above for full details of each grade.
Minimum tensile strength, yield strength, elongation and hardness requirements vary by grade — see the Mechanical Properties table above for the complete breakdown.
We supply ASTM F468/F468M fasteners — bolts, screws, studs, nuts and washers as applicable — for energy, petrochemical, marine, structural and general engineering service, in a full range of sizes and finishes.
Yes. For a quotation, provide the required fastener type, grade, nominal size, dimensional standard, quantity and any inspection or certificate requirements.
Need a fastener released to ASTM F468/F468M for an industrial project? Send the required fastener type, grade, size, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ASTM F468/F468M requirement, material grade, fastener type, nominal size, dimensional standard, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Data compiled per ASTM F468/F468M and industry references; provided for reference only — confirm against the current edition of the standard and certified mill test reports before design use.
