At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of DIN 1052. Large-diameter thick washers for timber (wood) construction. Distribute bolt clamp load over a wide bearing area to prevent the head or nut pulling into soft timber. Round pattern; oversized outside diameter and heavy thickness relative to standard flat washers. Bolt sizes M12-M30.
Large-diameter thick washers for timber (wood) construction. Distribute bolt clamp load over a wide bearing area to prevent the head or nut pulling into soft timber. Round pattern; oversized outside diameter and heavy thickness relative to standard flat washers. Bolt sizes M12-M30.
oversize thick washer for timber connections
Key dimensions for common sizes are listed below.
| Bolt size | Inside dia d1 (mm) | Outside dia dc (mm) | Thickness h (mm) |
|---|---|---|---|
| M12 | 14 | 58 | 6 |
| M16 | 18 | 68 | 6 |
| M20 | 22 | 80 | 8 |
| M22 | 25 | 92 | 8 |
| M24 | 27 | 105 | 8 |
| M27 | 30 | 115 | 10 |
| M30 | 33 | 125 | 10 |
n/a (non-threaded washer)
[‘DIN 436’, ‘DIN 440’, ‘DIN 126’, ‘DIN EN 14592’]
For the official DIN standards catalogue, see the DIN standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce DIN 1052 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Large-diameter thick washers for timber (wood) construction. Distribute bolt clamp load over a wide bearing area to prevent the head or nut pulling into soft timber. Round pattern; oversized outside diameter and heavy thickness relative to standard flat washers. Bolt sizes M12-M30.
Ananka Fasteners manufactures DIN 1052 in sizes from M12–M30. See the Dimensional Table above for the complete size breakdown.
n/a (non-threaded washer)
We produce DIN 1052 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to DIN 1052 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: DIN 1052 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per DIN 1052 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
