At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of DIN 6798 V. Serrated (toothed) lock washers, Form V = countersunk external-tooth (conical / dished) type. The dished body with external serrations bites into both the bolt head and the joint face to resist loosening under vibration; suits countersunk-style bearing surfaces. Companion forms: A (flat external tooth), I/J (internal tooth). Sizes M3-M12.
Serrated (toothed) lock washers, Form V = countersunk external-tooth (conical / dished) type. The dished body with external serrations bites into both the bolt head and the joint face to resist loosening under vibration; suits countersunk-style bearing surfaces. Companion forms: A (flat external tooth), I/J (internal tooth). Sizes M3-M12.
countersunk external-tooth serrated lock washer
Key dimensions for common sizes are listed below.
| Size | Inside dia d1 (mm) | Outside dia d2 (mm) | Thickness s (mm) |
|---|---|---|---|
| M3 | 3.2 | 6.0 | 0.4 |
| M4 | 4.3 | 8.0 | 0.4 |
| M5 | 5.3 | 10.0 | 0.5 |
| M6 | 6.4 | 11.8 | 0.5 |
| M8 | 8.4 | 15.0 | 0.6 |
| M10 | 10.5 | 18.0 | 0.8 |
| M12 | 13.0 | 20.5 | 0.9 |
n/a (non-threaded washer)
[‘DIN 6798 A’, ‘DIN 6798 I’, ‘DIN 6797’, ‘DIN 6799’]
For the official DIN standards catalogue, see the DIN standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce DIN 6798 V fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Serrated (toothed) lock washers, Form V = countersunk external-tooth (conical / dished) type. The dished body with external serrations bites into both the bolt head and the joint face to resist loosening under vibration; suits countersunk-style bearing surfaces. Companion forms: A (flat external tooth), I/J (internal tooth). Sizes M3-M12.
Ananka Fasteners manufactures DIN 6798 V in sizes from M3–M12. See the Dimensional Table above for the complete size breakdown.
n/a (non-threaded washer)
We produce DIN 6798 V fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to DIN 6798 V for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: DIN 6798 V requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per DIN 6798 V and industry references; provided for reference only — confirm against the current edition of the standard before design use.
