At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of DIN 95. DIN 95 covers slotted raised countersunk (oval) head wood screws. The head combines a 90-degree countersunk cone with a rounded raised dome, giving a decorative flush-but-domed finish. Threads follow the wood screw (AB) form to DIN 7998 with a gimlet point.
DIN 95 covers slotted raised countersunk (oval) head wood screws. The head combines a 90-degree countersunk cone with a rounded raised dome, giving a decorative flush-but-domed finish. Threads follow the wood screw (AB) form to DIN 7998 with a gimlet point.
Slotted raised countersunk (oval) head wood screw
Key dimensions for common sizes are listed below.
| Screw Dia d (mm) | Head Dia dk (mm) | Head Height k (mm) | Slot Width n (mm) | Slot Depth t (mm) |
|---|---|---|---|---|
| 1.6 | 3.0 | 0.96 | 0.4 | 0.8 |
| 2.0 | 3.8 | 1.2 | 0.5 | 1.0 |
| 2.5 | 4.7 | 1.5 | 0.6 | 1.2 |
| 3.0 | 5.6 | 1.65 | 0.8 | 1.45 |
| 3.5 | 6.5 | 1.93 | 0.8 | 1.7 |
| 4.0 | 7.5 | 2.2 | 1.0 | 1.9 |
| 4.5 | 8.3 | 2.35 | 1.0 | 2.1 |
| 5.0 | 9.2 | 2.5 | 1.2 | 2.3 |
| 6.0 | 11.0 | 3.0 | 1.6 | 2.8 |
Wood screw (AB) thread per DIN 7998
Related and equivalent standards include DIN 96 (round head woodscrew), DIN 97 (countersunk woodscrew) and DIN 7995 (raised csk cross-recess).
For the official DIN standards catalogue, see the DIN standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce DIN 95 fasteners in carbon and alloy steel, austenitic and duplex stainless, and high-nickel, titanium and copper alloys — for structural, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
DIN 95 covers slotted raised countersunk (oval) head wood screws. The head combines a 90-degree countersunk cone with a rounded raised dome, giving a decorative flush-but-domed finish. Threads follow the wood screw (AB) form to DIN 7998 with a gimlet point.
Ananka Fasteners manufactures DIN 95 in sizes from 1.6–6.0. See the Dimensional Table above for the complete size breakdown.
Wood screw (AB) thread per DIN 7998
We produce DIN 95 fasteners in carbon and alloy steel, austenitic and duplex stainless, and high-nickel, titanium and copper alloys — for structural, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to DIN 95 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: DIN 95 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per DIN 95 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
