At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of DIN 976 A/B. DIN 976 covers metric fully threaded stud bolts / threaded rod. Form A (DIN 976-1) is a cut length of fully threaded rod with plain (chamfered) ends; Form B is supplied as bar stock (typically 1000 mm / 2000 mm / 3000 mm lengths). As a length-and-thread spec it has no per-size head table; the fixed geometry is nominal thread size, pitch and standard stock length. Corresponds to DIN 975 threaded rod.
DIN 976 covers metric fully threaded stud bolts / threaded rod. Form A (DIN 976-1) is a cut length of fully threaded rod with plain (chamfered) ends; Form B is supplied as bar stock (typically 1000 mm / 2000 mm / 3000 mm lengths). As a length-and-thread spec it has no per-size head table; the fixed geometry is nominal thread size, pitch and standard stock length. Corresponds to DIN 975 threaded rod.
fully threaded stud bolt / threaded rod
Key dimensions for common sizes are listed below.
| Nominal Size | Coarse Pitch P (mm) | Standard Stock Length (mm) |
|---|---|---|
| M6 | 1.0 | 1000 |
| M8 | 1.25 | 1000 |
| M10 | 1.5 | 1000 |
| M12 | 1.75 | 1000 |
| M16 | 2.0 | 1000 |
| M20 | 2.5 | 1000 |
| M24 | 3.0 | 1000 |
6g (external thread)
[‘DIN 975’, ‘DIN 938’, ‘DIN 939’, ‘ISO 898-1’]
For the official DIN standards catalogue, see the DIN standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce DIN 976 A/B fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
DIN 976 covers metric fully threaded stud bolts / threaded rod. Form A (DIN 976-1) is a cut length of fully threaded rod with plain (chamfered) ends; Form B is supplied as bar stock (typically 1000 mm / 2000 mm / 3000 mm lengths). As a length-and-thread spec it has no per-size head table; the fixed geometry is nominal thread size, pitch and standard stock length. Corresponds to DIN 975 threaded rod.
Ananka Fasteners manufactures DIN 976 A/B in sizes from M6–M24. See the Dimensional Table above for the complete size breakdown.
6g (external thread)
We produce DIN 976 A/B fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to DIN 976 A/B for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: DIN 976 A/B requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per DIN 976 A/B and industry references; provided for reference only — confirm against the current edition of the standard before design use.
