At Ananka Fasteners Pvt Ltd, we engineer, manufacture, and supply premium Nickel 201 (UNS N02201) Hex Nut built for demanding service. Low-carbon (0.02% C max) nickel that resists graphitization and intergranular embrittlement above 315°C. This technical datasheet covers the precise dimensional tolerances per DIN 934 and the material requirements dictated by ASTM F467 Gr N02201 and ASTM B160.
A Nickel 201 Hex Nut is the standard mating nut for general-purpose bolted assemblies and is manufactured to match the thread series of its corresponding bolt. The tables below provide the principal dimensions, equivalent material grades, chemical composition and mechanical properties covered by the technical data for this product.
Our hex nuts are manufactured in standard and custom configurations, ensuring a precise fit for demanding structural, piping, and chemical-process applications.
| Product Name | Nickel 201 Hex Nut | Material Category | High-Nickel Alloy |
| Material Grade | Nickel 201 (UNS N02201) | Fastener Spec | ASTM F467 Gr N02201 |
| Dimension Spec | DIN 934 | Material Spec | ASTM B160 |
| Thread Standard | ISO 261 / ISO 965 (Metric Coarse) | Thread Tolerance | 6H / 4H6H (Internal) |
The DIN 934 specification governs the physical geometry of this product. The tolerances below ensure a secure, reliable mate under service loads. DIN 934 governs metric hexagon nuts.
| Nominal Thread (d) | Pitch (mm) | Width Across Flats s (mm) | Width Across Corners e (min, mm) | Thickness m (Max, mm) |
|---|---|---|---|---|
| M6 | 1.0 | 10.00 | 11.05 | 5.0 |
| M8 | 1.25 | 13.00 | 14.38 | 6.5 |
| M10 | 1.5 | 16.00 | 17.77 | 8.0 |
| M12 | 1.75 | 18.00 | 20.03 | 10.0 |
| M16 | 2.0 | 24.00 | 26.75 | 13.0 |
| M20 | 2.5 | 30.00 | 32.95 | 16.0 |
| M24 | 3.0 | 36.00 | 39.55 | 19.0 |
| M30 | 3.5 | 46.00 | 50.85 | 24.0 |
The nut thread is manufactured to match the corresponding bolt thread series and class. Buyers should confirm the required nominal size, thread series and thread class against the purchase drawing or applicable standard before ordering.
The UNS N02201 Hex Nut is manufactured from Nickel 201, a high-nickel alloy. The equivalent designations below assist with cross-referencing this material against European, British and other national standards.
| US / UNS | Werkstoff Nr. (DIN) | European (EN) | British Standard (BS) | Other / AFNOR |
|---|---|---|---|---|
| N02201 | 2.4061 / 2.4068 | LC-Ni 99 | NA 12 | N-U 99 (AFNOR) |
This section details the chemical composition limits and minimum mechanical properties governing Nickel 201 (UNS N02201) fasteners, as dictated by ASTM F467 Gr N02201 (chemistry & mechanicals) and the raw bar/rod standard ASTM B160.
| Element | Composition, % |
|---|---|
| Nickel, min | 99.0 |
| Copper, max | 0.25 |
| Iron, max | 0.40 |
| Manganese, max | 0.35 |
| Carbon, max | 0.02 |
| Silicon, max | 0.35 |
| Sulfur, max | 0.01 |
| Condition / Temper | Tensile Strength min, psi (MPa) | Yield Strength min, psi (MPa) | Elongation min, % | Hardness |
|---|---|---|---|---|
| Hot-worked, all sizes | 50 000 (345) | 10 000 (70) | 40 | – |
| Annealed, all products, all sizes | 50 000 (345) | 10 000 (70) | 40 | B45–B70 |
Our Nickel 201 hex nuts are specified across the following industries and service conditions, drawing on the material’s core strengths:
For severe sour, high-temperature or highly acidic service, the exact operating conditions should be reviewed against the alloy’s certified data rather than general nickel-alloy assumptions.
Every batch of Hex Nuts produced undergoes rigorous internal and third-party testing to ensure zero-defect delivery. We supply complete traceability with our global shipments.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
This datasheet references DIN 934 for dimensional requirements and ASTM F467 Gr N02201 for material and fastener requirements. The applicable standard edition and purchase requirements should be confirmed for every project.
For DIN standards information, see the DIN standards catalogue. For ASTM International material and fastener specifications, see the ASTM International standards catalogue. These external references are provided for standards identification; the purchaser should verify the current edition applicable to the order.
A Nickel 201 Hex Nut is a standard hex-driven nut manufactured from Nickel 201 (UNS N02201). The product combines the DIN 934 dimensional geometry with the ASTM F467 Gr N02201 material and fastener requirements.
The dimensional information in this datasheet is based on DIN 934, which governs the physical geometry of this product. The table above provides the principal dimensions listed for the Nickel 201 product range.
Nickel 201 is identified as UNS N02201. The equivalent designations listed in this datasheet include Werkstoff Nr. 2.4061 / 2.4068, EN LC-Ni 99, British Standard NA 12, N-U 99 (AFNOR).
Nickel 201 is a high-nickel alloy known for excellent resistance to high-temperature oxidation and aggressive chemical environments. For severe sour, high-temperature or highly acidic service, the exact operating conditions should be reviewed against the alloy’s certified data rather than general nickel-alloy assumptions.
The product information supports standard and custom configurations. For a quotation, provide the required material grade, nominal size, dimensional requirement, quantity, standard and any inspection or certificate requirements.
Need a Nickel 201 Hex Nut for an industrial project? Send the required size, quantity, standard and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: Nickel 201 / UNS N02201, nominal size, DIN 934 requirement, quantity, inspection requirements and EN 10204 certificate requirements where applicable.