At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of ISO 2009. ISO 2009 covers slotted countersunk (flat, 90-degree) head machine screws, product grade A, in the metric coarse thread range M1.6 to M10 (equivalent to DIN 963).
ISO 2009 covers slotted countersunk (flat, 90-degree) head machine screws, product grade A, in the metric coarse thread range M1.6 to M10 (equivalent to DIN 963).
Slotted countersunk (flat) head machine screw, product grade A
Key dimensions for common sizes are listed below.
| Thread d | Head dia dk max (mm) | Head height k (mm) | Slot width n (mm) |
|---|---|---|---|
| M1.6 | 3.0 | 1.0 | 0.4 |
| M2 | 3.8 | 1.2 | 0.5 |
| M2.5 | 4.7 | 1.5 | 0.6 |
| M3 | 5.5 | 1.65 | 0.8 |
| M4 | 8.4 | 2.7 | 1.2 |
| M5 | 9.3 | 2.7 | 1.2 |
| M6 | 11.3 | 3.3 | 1.6 |
| M8 | 15.8 | 4.65 | 2.0 |
| M10 | 18.3 | 5.0 | 2.5 |
6g external thread
[‘DIN 963’, ‘ISO 2010’, ‘ISO 7046’, ‘ISO 1482’]
For the official ISO standards catalogue, see the ISO standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce ISO 2009 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
ISO 2009 covers slotted countersunk (flat, 90-degree) head machine screws, product grade A, in the metric coarse thread range M1.6 to M10 (equivalent to DIN 963).
Ananka Fasteners manufactures ISO 2009 in sizes from M1.6–M10. See the Dimensional Table above for the complete size breakdown.
6g external thread
We produce ISO 2009 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to ISO 2009 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ISO 2009 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per ISO 2009 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
