At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of ISO 2010. ISO 2010 covers slotted raised countersunk (oval) head machine screws, product grade A (equivalent to DIN 964). It is a MACHINE screw, not a tapping/self-drilling screw as the input implied; category corrected from Tapping to CSK / Countersunk Screws. Same 90-degree countersunk seat as ISO 2009 plus a raised lens on top.
ISO 2010 covers slotted raised countersunk (oval) head machine screws, product grade A (equivalent to DIN 964). It is a MACHINE screw, not a tapping/self-drilling screw as the input implied; category corrected from Tapping to CSK / Countersunk Screws. Same 90-degree countersunk seat as ISO 2009 plus a raised lens on top.
Slotted raised countersunk (oval) head machine screw, product grade A
Key dimensions for common sizes are listed below.
| Thread d | Head dia dk max (mm) | Countersunk height (mm) | Raised height f (mm) |
|---|---|---|---|
| M2 | 3.8 | 1.2 | 0.5 |
| M2.5 | 4.7 | 1.5 | 0.6 |
| M3 | 5.5 | 1.65 | 0.75 |
| M4 | 8.4 | 2.7 | 1.0 |
| M5 | 9.3 | 2.7 | 1.25 |
| M6 | 11.3 | 3.3 | 1.5 |
| M8 | 15.8 | 4.65 | 2.0 |
| M10 | 18.3 | 5.0 | 2.5 |
6g external thread
[‘DIN 964’, ‘ISO 2009’, ‘ISO 7047’, ‘ISO 2342’]
For the official ISO standards catalogue, see the ISO standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce ISO 2010 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
ISO 2010 covers slotted raised countersunk (oval) head machine screws, product grade A (equivalent to DIN 964). It is a MACHINE screw, not a tapping/self-drilling screw as the input implied; category corrected from Tapping to CSK / Countersunk Screws. Same 90-degree countersunk seat as ISO 2009 plus a raised lens on top.
Ananka Fasteners manufactures ISO 2010 in sizes from M2–M10. See the Dimensional Table above for the complete size breakdown.
6g external thread
We produce ISO 2010 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to ISO 2010 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ISO 2010 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per ISO 2010 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
