At Ananka Fasteners Pvt Ltd, we manufacture fasteners to the dimensional requirements of ISO 7434. Slotted set screws with cone point, thread sizes M1.6 to M12. Driven by a straight screwdriver slot; the 90-degree cone point digs into the mating part for a strong, semi-permanent grip. Equivalent to DIN 553.
Slotted set screws with cone point, thread sizes M1.6 to M12. Driven by a straight screwdriver slot; the 90-degree cone point digs into the mating part for a strong, semi-permanent grip. Equivalent to DIN 553.
Slotted set screw (cone point)
Key dimensions for common sizes are listed below.
| Size | Slot width n (mm) | Slot depth t (mm) | Point cone angle |
|---|---|---|---|
| M3 | 0.5 | 0.8 | 90 deg |
| M4 | 0.6 | 1.1 | 90 deg |
| M5 | 0.8 | 1.3 | 90 deg |
| M6 | 1.0 | 1.5 | 90 deg |
| M8 | 1.2 | 2.0 | 90 deg |
| M10 | 1.6 | 2.4 | 90 deg |
| M12 | 2.0 | 2.8 | 90 deg |
6g (external, ISO 965)
[‘DIN 553’, ‘ISO 4766 (slotted set screw, flat point)’, ‘ISO 7435 (slotted set screw, long dog point)’, ‘ISO 4027 (hex socket set screw, cone point)’]
For the official ISO standards catalogue, see the ISO standards listing. This external reference is provided for standards identification; the purchaser should verify the current edition applicable to the order.
We produce ISO 7434 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
For technical documentation and quotations, buyers can also review the Ananka Fasteners manufacturing and supply range or contact the team through the fastener enquiry and technical support page.
Ananka Fasteners supplies every lot with full material traceability and third-party testing on request.
Slotted set screws with cone point, thread sizes M1.6 to M12. Driven by a straight screwdriver slot; the 90-degree cone point digs into the mating part for a strong, semi-permanent grip. Equivalent to DIN 553.
Ananka Fasteners manufactures ISO 7434 in sizes from M3–M12. See the Dimensional Table above for the complete size breakdown.
6g (external, ISO 965)
We produce ISO 7434 fasteners in carbon and alloy steel, austenitic, duplex and super-duplex stainless, and high-nickel, titanium and copper alloys — for structural, flanged, machinery and process applications worldwide.
Yes. For a quotation, provide the required nominal size, material grade, quantity and any inspection or certificate requirements.
Need a fastener manufactured to ISO 7434 for an industrial project? Send the required fastener type, size, material grade, quantity and certification requirements to Ananka Fasteners. Our team can review the requirement and provide technical and commercial information for standard or custom configurations.
Recommended RFQ details: ISO 7434 requirement, nominal size, material grade, quantity, inspection requirements and EN 10204 certificate requirements where applicable.
Dimensions compiled per ISO 7434 and industry references; provided for reference only — confirm against the current edition of the standard before design use.
